Question about 2000 Jeep Grand Cherokee

1 Answer

No turn signals or flashers

I have a 99 Jeep CHerokee Laredo and all of a sudden the head lights, turn signals, flashers, back lights- none of them work. I had the fuses checked and they are all good. Can someone please help solve my problem???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 41 Answers

It sounds like the multifunction switch on the column has gone bad or there is a short somewhere in that circuit.  If you noticed, all of those lights and flashers are controlled by the stalk and switches on the steering column, this assembly may need to be replaced if it has gone bad, but you will need to get it diagnosed at a shop to find out if it is in fact bad or if it is just not getting power to it from the circuit, this can be further tested by checking if the fuse itself is getting power to it in the first place.

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 jeep grand cherokee none of the rear lights work


Check BackUp Module, generally is located in the rear quarter panel (drivers side).

Dec 23, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My 99 Jeep grand Cherokee Laredo 4x4 has some brake light problems. The brake lights work fine during the day, but when I need to have my headlights on, my left brake light and tail light competley shut...


If you have any extra fuses, try replacing the ones for the head lights and tail lights. Make sure the fuses you replace are the same color as the ones you replace them with, that way the voltages are the same. Another issue is that a flasher could be going out.

May 01, 2012 | 1999 Jeep Grand Cherokee

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

2 Answers

Turn signals, hazards not working


Mine just went out this past week and found the flasher/hazard fuse inside the glove compartment under the plate with the pull cord to access.The 1994 Jeep Grand Cherokee Laredo AWD part# on the fuse and called to confirm with a Jeep dealer is:
56007243 and appx. 44.00 from the dealer, may be able to get from an auto store as well.

Good luck if it is the fuse box you were looking for.

Aug 09, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Turn signals and ac stopped working at the same time


don't know if they are related. as for the turn signals check the flasher. there should be 2 of them.one for the turn sinals the other for the emer. flashers

Mar 11, 2009 | 1999 Jeep Grand Cherokee

1 Answer

1997 jeep grand cherokee laredo - no turn signals.


Check your fuses the turn signal fuse could be blown.

Mar 10, 2009 | 1997 Jeep Grand Cherokee

1 Answer

I have a 2000 Jeep Grand Cherokee Laredo, and I am experiencing no turn signals or flashers. I have replaced the fuses, but still have nothing. What do you think the problem could be?


Had similar problem when i bought my 2000 jeep ch. laredo,I had to bend the metal contacts up on the rear lights where u pull out the bulbs,also cleaned them up with sandpaper,only one bulb was not making contact and so none of my rear lights worked prop.buying new light essembly would also work.

Nov 28, 2008 | 2000 Jeep Grand Cherokee

2 Answers

Indicator stays on


i am going to take it you are talking about the turn signal...look for a burned out bulb...that will cause this condition

Oct 30, 2008 | 2000 Jeep Grand Cherokee

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...