Question about 2004 Dodge Neon

1 Answer

Cam Shaft Sensor Problems

I need to know where this sensor is located on my 2003 Dodge Neon
Where is the camshaft sensor and the knock sensor on my 2004 dodge neon

Posted by on

  • 1 more comment 
  • Anonymous Mar 14, 2014

    i don't know which way my 2003 dodge neon transmission accumlators turn when i put them back in

  • Anonymous Mar 30, 2014

    changing a knock sensor

  • Anonymous Mar 31, 2014

    location of cam shaft sensor

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Had the same problem before on my 04 Neon SXT...camshaft sensor is on left side of engine block, take out the battery and to the left of it (face car) is the camshaft position sensor. To change it you'll have to move a few hoses but its plan to see there on the left side of the engine...pretty easy remove and replace. Fixed my problem of car not going above 2k RPM when i replaced the sensor.

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car momentarally shutters at all speeds and gears more and more frequently after it is warmed up. You can feel it slightly at idle.


2003 neon shaking after changing both right motor mounts ...

www.topix.com > Dodge Neon
Mar 10, 2012 - ... News Offbeat Stars! Topix > Dodge Neon > 2003 neon shaking after changing both. .... Google dodge neon engine alignment, and some sites will fill you in better. Reply ». Report Abuse .... 95 neon oil leak? (Oct '08), Oct 22 ... dodge neon engine vibration
Nov 10, 2012
2004 Dodge Neon SXT Problems
Jan 8, 2011
02 neon vibration under acceleration
Jul 21, 2007
97 Neon Idle rough
Jan 18, 2007
More results from www.topix.com

Oct 29, 2015 | 1995 Dodge Neon

1 Answer

Where is the camshaft sensor on a 2004 dodge neon sxt engine and how do i change it


disconnect the negative battery cable. the cmp sensor is located on the left end of the cylinder head. move thebrake booster hose and electrical wires out of the way to access the cmp sensor. disconnect the sensor plug by pushing the locking tab back toward the firewall. remove the 4 bolts from sensor and lift out sensor. remove the trox bolt which holds the target magnet to camshaft. when installing target magnet be sure to line up holes to dowels on end of camshaft. torque torx bolt to 30 in-lbs. be sure to install new o-ring on sensor and torque bolts to 80 in-lbs. (hallclifford)

Apr 08, 2010 | 2004 Dodge Neon

2 Answers

Camshaft


on a neon the cam sensor is located at the drivers side of the engine on the end of the head. it mounts directly over the end of the front camshaft. it is about 3 inches wide and about 2 and a half inches tall. its made of black plastic and has a wire conector in the back of it. these very comonly leak oil so be careful of the o ring and cleaning the mounting surface.

Jun 26, 2009 | 2004 Dodge Neon

1 Answer

2003 Dodge Neon: P0016 (already replaced sensors, belt, tensioner


the computer may need to be reflashed. if it is running then it is not a bad sensor. either of those being bad would cause it not to run.

Jun 20, 2009 | 2003 Dodge Neon

1 Answer

Engine code suggests Knock sensor is bad...but where is it at?


knock sensor is on the block, easy to do. not sure exactly where it is on your specific car but it looks like a fat bolt with 2 wires running out of it. but also check the wiring if its good for the knock sensor

Jun 18, 2009 | 2004 Dodge Neon

1 Answer

Cam Shaft Sensor Problems


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 20, 2009 | 2005 Dodge Neon

1 Answer

Where is located the camshaft sensor on a dodge sx 2.0 2003?


camshaft sensor located on end of cylinder head near battery..remove battery..4 bolts and wire connector..clean mounting surface and install new sensor

Mar 14, 2009 | 2003 Dodge Neon

1 Answer

Knock sensor location on a 2004 dodge neon


knock sensor is located under the intake manifold in front of the starter. what codes did you have?

Jan 06, 2009 | 2004 Dodge Neon

1 Answer

Cam Shaft Sensor Problems


This is a picture of the location of sensor. 62217_cmp_3.jpg

Aug 02, 2008 | 2003 Dodge Neon

Not finding what you are looking for?
2004 Dodge Neon Logo

1,237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...