Question about 2002 Honda CR-V

1 Answer

02 honda crv after warming up it shuts down at a stop

After warming up for ten min or more the car still wants to shut off and dose shut off when commeing to a stop

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 71,525 Answers

Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Dec 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bypass security for 1999Yukon ,I put a new egnitiontumbler and security don't let truck run shuts off qwik can I bypass this?


Try touching the positive and the negative battery cables together and then hooking them back on battery then this is important 1-- unlock with key (if not locked lock it then unlock all doors with key leave doors open and put key in try to start leave in the on position for ten mins until light stops blinking then try starting it again if it don't start then leave key in on position wait ten more mins and start truck as always hope this helps good luck

Feb 16, 2015 | Cars & Trucks

1 Answer

Stalls sometimes when stopped at lights engine misses at stop


Engine stalling and rough run issue at low speeds

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Sep 04, 2012 | Cars & Trucks

1 Answer

1998 honda civic cuts off while driving


have you tried the ignitor in the distributor

Jul 12, 2012 | 1998 Honda Civic

1 Answer

Car shuts off when it gets hot


your ignition coil are going bad, they need to be replaced. once the car gets hot the circuit shut down the car when hot. once they cool your riding again until they get hot. thats your problem. Good Luck

Jul 31, 2010 | 1988 Buick Electra

1 Answer

I have a gmc 3500 deisel,it starts and run great but out of no were it just shuts off.at stop ligyt or highway,doesn't matter.wait ten min. and it will start again,run for fifteen min. and die again.i...


check the camshaft and crankshaft sensors. If they get faulty (typical in GM cars) the PCM would shut down the engine. Happened the same problem to me and solved it by changing the crankshaft sensor.

Jan 24, 2010 | 1998 GMC Sierra

1 Answer

1999 Pontiac Sunfire ignition lock cylinder changed but car has anti theft and car wont start. How can I get it to start?


try turning the ignition on try to start then without shutting key off wait 10 mins then shut key off then back on but do not try starting leave on for ten mins then back off turn key back on to run but do not try starting it wait ten mins then if it reset it should crank over and start if not repeat all steps again

Sep 19, 2009 | 1999 Pontiac Sunfire

1 Answer

1994 accord runs then shuts off after 3 mins


check the timing you may have to replace the timing belt. and before you do this check to make sure all of the vaccum lines are on and none of them is damaged in any way.

Apr 09, 2009 | 1994 Honda Accord

1 Answer

1989 BMW 735i Hot start issue


You might want to try replacing your throttle return spring, or at least lift the hood and see if here is a change while it smooths out..

May 23, 2008 | BMW 750 Cars & Trucks

Not finding what you are looking for?
2002 Honda CR-V Logo

625 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...