An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: HEAD LIGHT ON 1995 DODGE
It sounds like you have a faulty high beam/low beam selector switch, if your headlamps aren't blown both on the low side. In order to change it, you also need to pull your steering wheel off, and it is also a part of your derictional switch assembly. Be aware if you have an air bag in the wheel, and if you do find out what you need to do first before disconnecting it, as some vehicles equiped with air bags can go off when you unplug or plug them.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The headlight switch gets power for the headlights from a 50amp fuse. The fuse powers the headlight switch then the dimmer switch breaks for high and low beams. So if the high beams work, the problem may be with the dimmer switch. The dimmer switch is made into the turn signal switch on the column. You would need to check the low and high beam circuits at the switch for power.
These trucks are known for bad multifuction switches. the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.
the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to. You will need to do a little testing to find the problem.