Question about Hyundai Motor 2004 Accent

Open Question

How to change windshield washer pump

Hi in my 2004 Hundai Accent my windshield washer pump is not working. i ahve the new one but how do i change it. thanks...

Posted by on

6 Suggested Answers

  • 899 Answers

SOURCE: 2004 buick Rainier windshield washer pump stays on

yes this is an electrical problem. it is either the relay is stuck or the switch is stuck on the inside , since the motor is working.
it will need to be checked out to see which one is causing it to continue to run.
hope this information is worth a fixya and if you need any other asistance , just ask!

Posted on Nov 18, 2008

  • 1779 Answers

SOURCE: how do i change brake fluid in my 2004 Hundai Accent

1st check the easy things, that would be the brake fluid level. If it's low, the light will go on. Next check the emergency brake, if it's on slightly, the light can come on. Your fluid should be changed when u have a brake job done, the light wouldn't be on for that, only if there is a problem w/ the system. Check this out asap, as it can be unsafe to drive. If adding fluid to the proper level results in the light going out, make sure to check the level daily to make sure u don't have a leak in the system (and u can look under the car for signs of a leak-drips stains puddles). As your brakes wear down, it is normal to have to add fluid, but only a small amount maybe a couple of times between brake jobs. If u have the brakes done in the future, have them flush out the brake system. This is overlooked most of the time, and can result in problems down the road w/ corrosion of calipers and brake cylinders, which lead to premature wear on the brake pads and shoes. Let me know how u make out.

Posted on Dec 15, 2008

  • 16 Answers

SOURCE: windshield washer on my 2002 hundai santa fe not

hi is there a noise coming from the washer when operated. it is posible there is a blockage in the tank at the pump intake. some windscreen wash additaves have a habbit of forming a heavy gunk. always use the liquid type. if there is no noise it is possibly a blown fuse or a faulty pump.

Posted on Jul 07, 2009

BCAS1298
  • 3092 Answers

SOURCE: 1998 Grand Prix GTP windshield washer (full) not pumping fluid

Yes it's easy to do, remove tank pull pump off of tank, and replace pump, Napa has this pump # 6651533 it runs between $14.00 and $20.00 .

Posted on Jan 04, 2010

cris_p
  • 62 Answers

SOURCE: changing the timing belt on a Hundai

  1. Remove all necessary components for access to the timing belt cover, then remove the cover.
  2. Rotate the crankshaft clockwise and align the timing marks so No. 1 piston will be at Top Dead Center (TDC) of the compression stroke.
  3. Loosen the tensioning bolt and the pivot bolt on the timing belt tensioner. Move the tensioner as far as it will go toward the water pump. Tighten the adjusting bolt.
  4. Mark the timing belt with an arrow showing direction of rotation.
  5. Remove the timing belt.
  6. If defective, remove the timing belt tensioner.
  7. Align the timing marks of the camshaft sprocket and check that the crankshaft timing marks are still in alignment.
  8. If removed, install the timing belt tensioner, spring and spacer with the bottom end of the spring free. Tighten the adjusting bolt slightly with the tensioner moved as far as possible away from the water pump.
  9. Install the free end of the spring into the locating tang on the front case.
  10. Position the timing belt over the crankshaft sprocket, then over the camshaft sprocket. Slip the back of the belt over the tensioner wheel.
  11. Turn the camshaft sprocket in the opposite of its normal direction of rotation until the straight side of the belt is tight and be sure the timing marks align.
    NOTE If the timing marks are not properly aligned, shift the belt 1 tooth at a time in the appropriate direction until they are aligned.
  12. Loosen the tensioner mounting bolts so the tensioner works, without the interference of any friction, under spring pressure. Be sure the belt follows the curve of the camshaft pulley so the teeth are engaged all the way around. Correct the path of the belt, if necessary.
  13. Tighten the tensioner adjusting bolt, then the tensioner pivot bolt to 15-18 ft. lbs. (20-26 Nm).
    NOTE Bolts must be tightened in the stated order or tension won't be correct.
  14. Turn the crankshaft 1 turn clockwise until timing marks again align to seat the belt.
  15. Loosen both tensioner attaching bolts and let the tensioner position itself under spring tension. Retighten the bolts.
  16. Check belt tension by putting a finger on the water pump side of the tensioner wheel and pull the belt toward the water pump. The belt should move toward the pump until the teeth are approximately 1 / 2 of the way across the head of the tensioner adjusting bolt. Re-tension the belt, if necessary.
  17. Install the timing belt covers and all other related components.

Posted on Feb 20, 2010

cris_p
  • 62 Answers

SOURCE: Replace 2004 Hundai Sonata Door Lock Actuator?

take all screws of ,,then take screws of actuator and cables then remove it ,,put in new one put everything back together

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the windshield washer pump


Yes pull the resivor and the pump should be on the bottom of the tank remove all hoses and power connection twist pump ccw and reinstall in reverse order pretty straight forward. ASE master certified tech.

Oct 05, 2014 | 2005 Hyundai Accent

1 Answer

Replace 2007 accent washer fluid reservoir


if same as 2004 Accent, then remove right front wheel, slide underneath, and start wrenching. should be 2-3 bolts

Jan 30, 2013 | 2007 Hyundai Accent GS Hatchback

1 Answer

2003 Hyundai Accent - Windshield washer pump - replacing it with Universal part but old has 3 original wires Orange, Blue, Blue w/ yellow or orange strip. Not sure how to re-hook them up. Can't find...


The hatchback Accent has two windshield wipers--one on the front and one on the hatchback so the pump can run to pump fluid to them each separately. You need a specific pump for that. I've written up a step-by-step tutorial on how to replace the pump and have a link for the correct part at my website: Replace Windshield Washer Pump on 1999 2005 Hyundai Accent Share Your...

Sep 09, 2011 | 2003 Hyundai Accent

2 Answers

Windshield washer pump quit working. wipers work ok thou. I can't find an exact replacement.


you can buy a in line pump most anywhere and it just goes in the washer fluid line and the wires from your old pump will need the ends changed to make it work.they come with good instruction.

Aug 29, 2009 | 2002 Hyundai Accent

1 Answer

Maintainance manul nfor hundai accent


A Maintaince/repair manual can be found at an Auto Parts Store for less than $20. Normally, it's a HAYNES or CHILTON manual.

Aug 20, 2009 | 2002 Hyundai Accent

1 Answer

Windshield washer on my 2002 hundai santa fe not working


hi is there a noise coming from the washer when operated. it is posible there is a blockage in the tank at the pump intake. some windscreen wash additaves have a habbit of forming a heavy gunk. always use the liquid type. if there is no noise it is possibly a blown fuse or a faulty pump.

Jul 07, 2009 | 2002 Hyundai Santa Fe

2 Answers

Windshield Washer Pump does not operate on 02 Accent


Your Accent has rear wiper/washer.. correct? That's where the 3rd wire comes in. They sold you/you bought the wrong pump. Here's the wiring diagrams:
bf35ab5.jpg
e609b85.jpg

Jun 01, 2009 | 2002 Hyundai Accent

1 Answer

I have a 2004 Hundai Accent....when it gets cold my windshield washer won't squirt....but when it milds up they work fine....or when I go get a car wash they work fine. I have the best windshield washer...


i had the same problem with my sunfire and it solved itself when i put de-icer washer fluid, or it could just be a little bit of water melting in the end and it freezes up

Dec 12, 2008 | 1997 Hyundai Accent

Not finding what you are looking for?
Hyundai Motor 2004 Accent Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...