Question about 2000 Isuzu Trooper

1 Answer

ISUZU 1999 / 2000 3.0 WONT START BREAKING PARTS 07962121933


Posted by on

  • BORIS88 Dec 15, 2008




1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi i have a isuzu trooper 3.0 td 2000 w plate when i go to start it in the morning the batteries are flat ill push it and jump start it park it up it will be ok all day long then but i go to start it in the morning same problem we put new injectors on new heater plugs new alternator had the battderies tested both are exelent batteries why is this could u please contact me on 07557105273

Posted on Mar 07, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1997 Isuzu Rodeo,4X4 with the 3.2 liter engine That the solenoid for the charcoal canister above the fuel tank has gone bad.

reason your having problems is you have the wrong part number the number you gave is for an injector not a solenoid call an auto parts store or do and online search under part name as well as year make model and engine

Apr 29, 2018 | Isuzu Cars & Trucks

1 Answer

Do i need to bleed the injector pump on my isuzu bighorn 4gj2 after replacing the head? as it wont fire

anytime you disconnect the fuel rail, and if it has a bleeder/test port (looks like a tire Valve), Then it needs to be bled before fuel will reach the injectors. Also check Spark plug ignition as well make sure grounds have been returned properly.

Oct 13, 2015 | Isuzu Cars & Trucks

1 Answer

I have an Isuzu KB300 , replaced Injector pump and now it only starts if you smear quick start, what could be the problem?

it sounds as if you have
nt bled the system.....tighten all the injectors, number 1 undo the injector turn the engine over now tighten number 1, then number 2 and the same to all injectors

Sep 15, 2013 | 1995 Isuzu Pickup

1 Answer

92 rodeo no in injectors

I have a 1992 Isuzu Rodio 3.1 injectors not working; but if i put gas in the throttle body it will start up and run. but while driving it down the street it will die and not re-start, until i put gas in the throttle body. the nod light does not work when it wont start. please can you help me with this problem, i have put a new fuel pump in it and two new injectors.

Oct 28, 2011 | 1992 Isuzu Rodeo

1 Answer

I just put a new head gasket on my 2.6lt isuzu motor, now it wont start. I have spark at the plugs. Do I need to bleed the fuel injectors somehow after I had them off??

Make sure you have connect the fuel injectors
electrical connecters in the correct injector.
You don't have to bleed them. Also the plug wires. If so it should start.

Jun 30, 2009 | Isuzu Rodeo Cars & Trucks

2 Answers

My Isuzu Trooper 2004 4JX1 turbo just underwent a general engine overhaul. Its cranking but will not start. All electricals are ok. Does the PCM needed to be reset for it to start?

The ECU will be fine with a engine rebuild but the 4JX takes a bit longer to start if all the injector oil paths are empty - can be up to 5 or 6 mins of 20 second cranking bursts.
Also if you rebuilt due to diesel in the oil from bad injectors the control valve for the injector oil pressure may be faulty so it wont start.

Apr 08, 2009 | 2001 Isuzu Trooper

1 Answer

97 isuzu hombre cylinder 2 misfire

1998 isuzu rodeo wont start no spark,no injector pulse

Jan 08, 2009 | 1997 Isuzu Trooper

4 Answers

Isuzu 4JX1 EngineWont Start after replacing new injector

my isuzu bighorn will not start after changing valve seals and head gasket and after setting timing it still will not start. do you have a solution.

Aug 09, 2008 | 1999 Isuzu Trooper

Not finding what you are looking for?
2000 Isuzu Trooper Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

81424 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14423 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides