Question about 1997 Jeep Wrangler

1 Answer

05 Jeep Wrangler High Beams Work, Low Beams dont

I have an 05 Wrangler and the high beams work, but the low beams dont. I have already chaged the bulbs (same thing happens), checked all fuses (they are good), and I think the wiring is good since the high beams work (havent noticed any problems with it). I think it is either the switch or relay, but I am not sure where the relays are for the lights.

Posted by on

  • mchase007 Jan 20, 2009

    I have teh same problem with my 1997 Jeep Wrangler. On mine the low beams work fine for the first 30 to 45 minutes of driving but if I go further than that the low beams stop working. I high beams continue to work fine. I am at a total loss as to why this is happening.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

There are no relays for the headlights. Your problem could be from the headlight switch. You would have to check and see if you have power coming out of the switch on the low beam side. Check with a test light.

Posted on Dec 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep wrangler high beams wont work


sounds like you need a schematic. ?
evah see this.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

see WIRING?
see HL?
see 8w-50
its all there.
use a voltmeter to find the point of lost power.

did you say the flash work but highs dont??
if switch pos, 2 works and 3 dont, the switch is bad
if spich pos 3 works and 2 dont, same.
see? they use the same power sources, and same lamp path
8w-50 page 2

Apr 04, 2014 | 1998 Jeep Wrangler

1 Answer

High beam indicator light on, no low beams only high beams 2003 jeep wrangler


Replace the dimmer switch. Contact may be fused together if the column stalk switch has no effect.

Feb 12, 2012 | 2003 Jeep Wrangler

1 Answer

Low beams work but high beams wont it just started


you may find that your high & low beam lights have separate fuses check the fuses in the fuse box to see if any are blown,also check the wiring & connector plugs on the headlight circuits....hope this helps....cheers

Jun 12, 2011 | 1988 Jeep Wrangler

1 Answer

I have a 2001 Jeep wrangler. the headlights do not come on. Only the high beams come on if the switch is held on.


sounds like the multifunction switch failure

disconnect the switch and jump the light blue/orange wire to the violet/white wire

assuming the low beams work then replace the multifunction switch

Apr 06, 2010 | 2001 Jeep Wrangler

1 Answer

High beam problem


no your highbeam switch has gone bad

Feb 09, 2009 | 1991 Jeep Cherokee Limited

1 Answer

High beam problem


Just to clarify, the high beam and low beam bulbs are the same bulb. It is a dual element bulb. If the bulbs and switch are known good, check the high beam relay.

Feb 07, 2009 | 1997 Jeep Wrangler

2 Answers

Head lights on 1990 jeep wrangle won't work


Ckeck the headlight connections they are notorious for corroding. Check the ground connection for the lights. Pull your dimmer switch back as if you were flashing a car to pass and see if they work there. If they do you have a dimmer switch problem.

Dec 20, 2008 | 2000 Jeep Wrangler

Not finding what you are looking for?
1997 Jeep Wrangler Logo

867 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...