Question about 2004 Ford Ranger
Horn went on by itself and would not go off until engine was turned off. restarted engine and horn stayed off
SOURCE: horn replacment
look under the dash at the fuse panel and locate the relay for the horn... replace it. quick way to tell which one it is is put your finger on each relay as you press the horn... the one that you can feel clicking is the one to replace.
Please take a moment to rate this solution thanks
Posted on Feb 08, 2009
The horn is usually between the radiator and grill Assembly. The fuse is in fuse panel under the dash on the drivers side. Look at the lid and it shows the fuse placement and there use.
Posted on Jun 12, 2009
I think you are right.Find the short and repair it or you can try to take the bulb out of the dome light and keep the switch on and see if that helps but you won't have a dome light.
Posted on Aug 29, 2009
if you get a clicking noise then the system has power to the relay, make sure the horn circuit has power as well, check fuse for the horn in the underhood fuse box, if it is ok replace the horn
Posted on Oct 12, 2009
they are located on the left front frame rail behind the front bumper. they are an assembly one bolt holds the horns, heres a diagram to help you.
Posted on Feb 07, 2010
Tips for a great answer:
Nov 23, 2016 | Ford Ranger Cars & Trucks
Feb 09, 2014 | 1997 Dodge Caravan
Jan 13, 2014 | Cars & Trucks
Jan 30, 2012 | 2004 Ford Freestar
Jan 19, 2011 | 2004 Ford Ranger
Feb 26, 2010 | 2004 Ford Ranger
Oct 24, 2009 | 1995 Ford Ranger Supercab
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: