Question about 2006 Pontiac G6

1 Answer

Engine light on

My engine light came on this evening on my 2006 Pontiac G6. I took it to O'Riellys and they put it on the diagnostic machine. The code they came up with is P1174. They could not find in their database what that means. Would you be able to help me with that? Thank you for your time.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 31 Answers

That code is for cylnder bank 2 running lean, there is actually an open technical service bulletin for this issue on your car, for clogged fuel injectors. That could be the problem, as well as a vac. leak, a malfunctioning bank 2 sensor 1 oxygen sensor.

Posted on Dec 15, 2008

  • Jacob
    Jacob Aug 22, 2012

    My wifes G6 has the same problem (p1174). I changed out the front O2 sensor and cleared the code but it came back on to my dismay. I did notice a crack in the exhaust manifold though. Could this be the cause?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm currently experiencing my 2006 pontiac g6 shifting hard and banging into gear while engine light on can any one help me with an answer


Your answer is in the engine light , have the vehicle check for DTC'S - diagnostic trouble codes , local auto repair shop or parts store can an will do it for free . If your not familiar on board diagnostics , check out this Check Engine Light On

Jun 03, 2016 | Pontiac Cars & Trucks

2 Answers

Pontiac g6 3.5 code po685


Trouble Code - AutoZone

www.autozone.com/...Codes/2.../_/P-0996b43f80cb157c

AutoZoneAutoZone Repair Guide for your Diagnostics Diagnostic Trouble Codes 2.9l L4 Vin 9 Std 3. ... Trouble Code: P0685. Engine Controls Ignition Relay Control ...

Same Problem Over and Over - Pontiac Solstice Forum

www.solsticeforum.com/forum/f11/same-problem-over-over-38354/
Oct 7, 2007 - Pontiac G6 Forum .... Relax and take it to a different Pontiac dealer. ...Not every code sets the Service Engine Soon light, and some of these .... P0685Engine Controls Ignition Relay Control Circuit P0686 Engine Controls ...

Jan 28, 2016 | Pontiac Cars & Trucks

1 Answer

Pontiac g6 emission light


Check engine light? Your code reader should display a coder starts with the letter P followed by four numbers. Example P0442. Post the codes and ill be happy to help.

Mar 30, 2013 | 2006 Pontiac G6

1 Answer

I have a 2006 pontiac g6 automatic 3.9 lit ,the engine light came on , so i took it to auto zone to get it tested, the transmission control module code came up, i checked all fuses , what do i do now ,...


You may need a more sophisticated scan tool for this type of analysis. Take it to a deal er or reputable mechanic who has such a tool. Without it, it can get very expensive with trial and error.

Jan 26, 2011 | 2006 Pontiac G6

1 Answer

I have a 2006 Pontiac G6; 4 cylinder...the check engine light is on and I need to get it off for my emissions test so I need help finding out what the problem is. Ive had the car put on the scanner twice...


when you changed the parts did you have the codes cleared ? as if the comp stored it then it will return and when you put new parts on it took the comp time to test and display new changes.

Jan 19, 2011 | 2006 Pontiac G6

1 Answer

What do I need to check if code 442 comes up.


442 cose states that there is a small leak at the evap control system (near fuel tank)... smell gas?

Sep 28, 2009 | 2006 Pontiac G6

1 Answer

Engine Seized up on a 2006 Pontiac G6


check the oil and coolant levels. if coolant is low pull the sparkplugs and try to turn the engine over if still not turning free remove the serpentine belt and try again, if it turns over ok check the pullyes on the front of the motor to see if they all turn free by hand. a serpentine belt can prevent an engine from turning over if a tensioner, idler, water pump, alternator, or power steering pump is siezed up or starting to seize. being your battery is bad I'm thinking probably the alternator is seized. hope this helps mike.

May 30, 2009 | 2006 Pontiac G6

3 Answers

Engine light 2006 pontiac g6(reset)


first be sure that its the engine light and not the "service" light. the service light will usually illuminate if its time for an oil change. if its the service light ur owners manual should tell u how to reset it. if its ur engine light then try disconnecting ur positive battery cable for 1 minute. that should reset ur ecm and get rid of the engine light. if the engine light comes back on then have a diagnostic scan done to determine whats causing it. LJ

Dec 29, 2008 | 2006 Pontiac G6

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

1,096 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...