Question about 1997 GMC Jimmy
My fan works and my heater core hasnt leaked, i changed my thermostat. and still there is no heat blowing out.
Is the thermostate coming from your intake any good its located were your upper radiator hose connects to your intake.under the water inlet housing. if its bad it wont close, if it doesnt close the water doesnt stay in the engine block long enough to heat up. if your a do it yourselfer remove the upper hose from your water inlet. now there should be two bolts holding down the water inlet they should either be 12mm or 1\2 inch remove these bolts. you will need a new gasket once removed or silicone. after removed you will see the thermostate. pop it out . it might be a little stuck, dont worry a little pressure it should just pop out. after you get it out check to see if open's by dropping it into a pot of boiling water for about 20 to 30 min.you should see were the two disks on the bottom come together,should be seperated(if good) if there not seperated you need a new one. just follow these steps in reverse to replace dont forget to clean were the inlet sits on manifold before applying new gasket. and definatly DO NOT OVER TIGHTEN BOLTS just a few turns crisscrossing until nice and snug
Posted on Dec 14, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 24, 2015 | Cars & Trucks
Nov 30, 2013 | Cars & Trucks
Jan 26, 2013 | 1987 Chevrolet Cavalier 4 Door
Jan 20, 2013 | 1998 Ford Explorer
Feb 05, 2010 | 2002 Chevrolet Suburban 2500
Jan 03, 2010 | 1999 Jeep Cherokee 4WD
Nov 05, 2009 | 2002 Jeep Grand Cherokee
Mar 08, 2009 | 1991 Dodge Daytona
Feb 12, 2009 | 1999 GMC Sonoma
Nov 17, 2008 | 1995 Dodge Dakota
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: