Question about 2002 Ford F350 Super Duty DRW Reg. Cab

1 Answer

2002 F-350 7.3 liter deisel engine heater

My understanding is that my 2002 F-350, 7.3 liter deisel, came stock with an OEM engine heater, but I am unabel to find the cord to plug-in the engine heater.

Can you confirm that the engine heater was standard equipment in 2003 on the 7.3 liter deisel F-350s?

John Goff

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There should be a small wire harness on the inside of the driver side tow hook under the bumper. The chord is very short and has a cap over the plug. Just reach in and you'll find a black cable about 1/2" thick. There's another wire tapped into it that has the plug end.

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am doing a motor swap in my 95 jeep grand Cherokee, I am puttin in a 5.2 liter v8 which is what is stock. My question is on my original motor I have one fuel line coming from the rail and on the 94 motor...


to clarify, if i understand correctly your old engine has one fuel line and the replacement has a feed and return line on the fuel rail. if this is the case the usual thing to do would be to use the fuel rail and injectors from the old engine"stock engine pulled from your vehicle" Its not unusal in an engine swap to need to re-use the origianal sensors, harness and fuel system due to design changes from year to year. in your case, the engine going in is a year older than the one being pulled so i would definately use all componets off of the 95 placed on the 94 replacement engine make sure to use the factory harness for the 95 as well. please forgive spelling and grammer long day at the office Good luck let me know if you need any further help!

Apr 06, 2012 | 1995 Jeep Grand Cherokee

1 Answer

What is the spark plug gap on a 2005 Ford Explorer Sport Trac


The gap for a stock OEM plug is .054 in a 4.0 liter engine.

Feb 13, 2012 | 2005 Ford Explorer Sport Trac

1 Answer

I need the firing sequence on the 1994 GMC Sonoma from spark plugs to the distributor cap. My brother got the wires mixed up...he doesn't know where the wires go.


Here is the firing order diagrams for the 4.3 liter V-6 engine and the 2.2 liter 4 cylinder engine, and let me know if you need any help to understand these diagrams, or if you require any further assistance.

4.3 Liter V-6 Engine.


6ad9cf8.jpg
2.2 Liter 4 cylinder engine.


3390e18.jpg

Oct 04, 2010 | 1994 GMC Sonoma

2 Answers

Can't understand why after changing oil the engine would cosume up to 21 quarts of oil without moving truck there is no oil on ground or coolant please help


Where did you put the oil? Did you check it? Or just keep filling? You didn't put it in the gas tank did you? Gotta know these things.

Apr 15, 2010 | 2002 Ford F250 Super Duty SuperCab

1 Answer

I found a grey broken vacumn line on my ford 6.0 liter deisel . It goes to a actuating door just above cylinder 5. What does it do?


The gray vacuum hose is for your heater control valve. It shuts it off when on max a/c . Repair the hose and put it back on. It can also cause your a/c to blow out the defrost.

Oct 15, 2009 | 2006 Ford F 350 Super Duty

1 Answer

Need a diagram of 6.0 liter deisel motor please


Have a F250 with a 6.0 liter deisel motor. I'm getting oil and water mixed in the radiator. hat could be the problem?

Sep 27, 2009 | 2005 Ford F 350 Super Duty

1 Answer

Figuring out the emission and transmision type


The stickers on the underside of the hood provide information on the engine type. If you're going to a Honda dealership, if you have the VIN they will be able to provide the correct parts.

Feb 09, 2009 | 1991 Honda Accord

1 Answer

Cant remove stock OEM Radiator core support to install new one. Know why i cant remove this?


what are you calling the OEM radiator core ???the heater rad in the car or the main rad

Jan 10, 2009 | 2003 Hyundai Accent

1 Answer

Ford focus 1.8 turbo deisel 1999.


do not understand you what you mean. assuming your car was ok before you changed f/filter you need to bleed the fuel system of air. esiest to do would be to loosen fuel line at the injectors and have assistant crank the engine while you observe for clear fuel leak without any air bubbles from fuel line.tighten fuel lines and start engine. might have to repeat a few times. good luck.

Jul 03, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2002 Ford F350 Super Duty DRW Reg. Cab Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...