Question about 1993 Saab 900

1 Answer

How do i retrieve a check engine code on a 93 saab 900 ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 37 Answers

GO TO AUTO ZONE OR ADVANCE AUTO. THEY WILL DO IT FOR YOU FOR FREE

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saab 93 tid oil in the water


find the engine block breather pipe ,check see if its blocked , should be clear , might need cleaning , could be blocked ,try clean out using white spirit

Sep 23, 2012 | 1996 Saab 900

1 Answer

WHAT DOES ENGINE COE P502 MEANS ON A 2000 SAAB 93


The Code you're referring to should be a "P0502." What the Code signifies is: "Vehicle speed sensor circuit, low input."

May 18, 2010 | 2000 Saab 9-3 Viggen

4 Answers

What oil should I use in my Saab 96 900?


factory recommends you use 10w-30 motor oil ,hope this is helpful.

Nov 27, 2009 | 1996 Saab 900

2 Answers

Camshaft position sensor failure on Saab 2003 93


replace it. there is a connection or a short in the sensor that's throwing the code. Get your Saab parts at Carquest Auto Parts, They have a WORLDPAC division for all hard to find(and easy) parts. trust me, you will save a fortune on Saab, Mercedes, Volvo and other high end parts.

Aug 29, 2009 | 1994 Saab 900

2 Answers

My 2003 Saab 9-3 drives sluggish.


Take your car to the dealer, local garage, auto parts store and get them to pull the code which should tell you exactly what the problem is. I would also check the transmission again and make sure it isn't leaking and is at the correct level. If the problem was low transmission fluid you still need to have the code "cleared" before the car will return to normal. Hope this helps.

Aug 25, 2009 | 1995 Saab 900

1 Answer

Retrieve fault codes 92 900


Fault codes come from the fuel injection system diagnostic circuitry, which can store up to three faults. They can be read through the check engine light in the dash. You'll need to make a switched test lead with a spade connector on one end for connecting to the test connector. The other end is connected to ground. In 1992 the test connector is located beneath rear seat in sedan, or under the bellows ahead of shifter in convertible. With ignition off and test lead off, connect test lead to ground and test connector pin 2. turn ignition key to ON When Check Engine light comes on, turn test lead switch ON; Check Engine light should immediately go out When Check Engine light flashes ONCE, IMMEDIATELY turn test lead switch OFF Any fault codes will flash through the Check Engine light, with a long flash at beginning and end of each code; code flashes are short flashes, each block of flashes is separated by a longer space. With the engne OFF, the first fault code is that for "No RPM" 1 2 2 3 1, it will look like oooo x xx xx xxx x oooo where o = steady on, x = single flash There are over 20 fault codes, so get yourself a copy of the best source of info on this car: the "Bentley Bible" aka the Saab 900 Official Service Manual, costs about $40 from Amazon 16 valve manual: http://www.amazon.com/Saab-900-Valve-Service-Manual/dp/0837603137 8 valve manual :http://www.amazon.com/Eight-Official-Service-Manual-1981-1988/dp/0837603102 Hope this helps, if it does please give a "thumbs up", thanks Saabreur

Jul 29, 2008 | 1992 Saab 900

Not finding what you are looking for?
1993 Saab 900 Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

rgbypoet

Level 2 Expert

161 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...