Question about Eagle Summit

1 Answer

My car won't start. I have fire on my plugs, and no gas.If some people have idea for me, tell it to me.

Posted by on

  • marsel59 Dec 17, 2008

    I have 1994 c-class same problem no fuel pressure has new fuel pump & relay. after several starts car will start fine. when car wont start no voltage going to fuel pump power circuit.

  • Anonymous Apr 26, 2009

    took the fuel line out and turned key over and no fuel came out

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

If youre not getting gas your fuel pump isnt working

Posted on Dec 14, 2008

4 Suggested Answers

  • 491 Answers

SOURCE: car won,t start, getting fire from the module,gas is coming up to

have you checked the fuel pump, or the timing, or coil pack, or fuses?

Posted on Jan 09, 2009

  • 22 Answers

SOURCE: Car won

Sounds like it's not getting enough fuel, check your fuel pressure.

Posted on Apr 28, 2009

  • 87 Answers

SOURCE: I have a '97 cavalier

1 coil pack is for cylinder 1 & 3 . The 1st & 3rd....moving back from the belts. 1 is on the top, three on the bottm of the coil. 2 & 4 should be the same, 2nd cylinder, 2nd back from the belts & top on the coil pack. 4 the last plug & lowest on the second coil pack. PLEASE NOTE: , A Handyman's Service manual, from an auto store can VERIFY THIS. My last experience was with the 1987- 1991 GM "Quad" 4 engines. One of the other experts on "FixYa" corrected a mistake I made on a newewr model. SO I WOULD CHECK this advise to A MANUAL. I was wrong on the other one I answewred, & do not want to add to your frustration. I have looked around my textbooks, I do not have one on that car, I have given it away.

Posted on Sep 22, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have fire and gas. airflow seems to have reversed. Intake pushing air out, any ideas.


If you know for a fact the timing belt is ok and cam timing is correct, I would say its a stuck or bent intake valve or two.
My first guess would be a damaged timing belt tho.

Feb 28, 2016 | Cars & Trucks

1 Answer

Trouble to start and shakes and when starts smells like gas


It is hard to tell from here, but that sounds very much like 2 plug wires are reversed.

Dec 03, 2013 | 2003 GMC Yukon XL

1 Answer

1993 Mazda MX-3 won't start


Check for spark at the sparkplug, to see if everything in the dist. is working right. And check the injector harness for something being pulled loose when the wires were jerked out.

Oct 17, 2012 | Cars & Trucks

1 Answer

94 Oldsmobile 88 Royale turns over, gets fire and gas but won't start


Crank position sensor...i have same car and that happened to me

Oct 14, 2012 | 1994 Oldsmobile 88

1 Answer

Won't start not firing where do you spray intake starter fluid?


into the air intake where the air filter goes

Aug 14, 2012 | 1999 Audi A6

1 Answer

I have a 1990 Crown Victoria LTD, it started sputtering at low speed. Then stalled and won't start now. Any ideas?


You will have to start a diagnosis. Starting with the small test then on to others. 1. Getting gas to carberator 2. Pull coil wire and verify firing.

Feb 19, 2012 | 1990 Ford LTD Crown Victoria

2 Answers

2000 nissan maxima won't fire when trying to start. it turns over but won't fire. it started once and ran but won't start again


sounds like it might be flooded. Try and remove the fuel pump fuse from the fuse block that is just in front of your left knee. While it is out crank the car and see if it wants to start and hold down the gas pedal all the way and then relase it and back and forth and once you get it to run have the fuse ready in your hand and in front of the spot to install it. and then keep the rpm's up with the gas pedal until the smoke clears out behind the car.

Jul 02, 2011 | 2000 Nissan Maxima

1 Answer

Car won,t fire up but trying to turn over its as


Lots of reasoons for a no start this answer is as if it was running OK just the other day and was starting OK. The gas tank has gas? Spinning real freely indicates to me that the timing belt broke. The oil cap off the valve cover look in there to see the cam and crank engine you should see it turn. The fuel pump may not be coming on. The fuel filter could be frozen not letting the gas go though. The spark may not be happening as A senser or also a plug wire or other wire off inspection of these things something off can be the only problem

Feb 08, 2010 | 2002 Volkswagen Golf

1 Answer

Car won


Sounds like it's not getting enough fuel, check your fuel pressure.

Apr 28, 2009 | Dodge Intrepid Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...