Question about 2000 Isuzu Rodeo

2 Answers

4 wheel drive will not disengage.

2000 5 Speed rodeo , has push button on dash. When disengaged the indecator light blinkes and stays in 4 wheel ..what could be problem??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I've had the same situation. I found the problem to be the Hi-Lo gear shift was not locked in place. In other words, it was between Hi and Lo. While the truck was off, I moved the gearshift from Hi back to Lo back to Hi, making sure it was in Hi gear. Then, after starting the car and traveling down the road, I found that the 4WD would disengage with the button.

Posted on Feb 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

If you have tried shifting stopped and moving, then I'd say the transfer servo could be broken. It is the motor on the transfer case that shifts it in and out of four wheel drive. If you know how to use a voltmeter, test the wires that run to the servo to see if it is getting the signals it should be. Newer vehicles usually have a computer associated with the transfer case motor. You could have the car plugged to a tester at auto zone to see if it is giving a code.

Posted on Dec 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2003 RA Holden Rodeo 3.0 ltr T/Diesel. The 2 front wheels don't seem to be engaging when i put it into 4wd (high or low range). I can hear the high and low range click in when i press the buttons...


Does yours have AUTO hubs, there are some luxory models have auto hubs, these rely on difference in drive on the axles,(wheel spin) others have manual locking hubs, these actually need to be engaged manually, these require you to twist the centre of the hub to engage and disengage the front hubs, these sometimes require you to reverse to disengage properly, Rodeo had both depending on model. Happy New Year

Dec 30, 2013 | Isuzu Rodeo Cars & Trucks

1 Answer

2002 ford explorer 4 wheel drive acting up


You have to put it in neutral with the engine running and the vehicle stopped and your foot on the brake. Press the button and wait a few seconds and you should hear it disengage. You have destoyed the deferential by driving it on a non slippery surface with the 4x4 engaged. Very very expensive mistake if you ever decide to fix it. Hopefully it will do ok in 2wd.

Jan 18, 2013 | Cars & Trucks

1 Answer

WHAT IS VTM-4 LIGHT?


VTM-4 LIGHT is the 4x4 option you can use when your in the auto shift gears 1 and 2. When you put the shifter in 1 or 2 gear, you can push the VTM-4 button on dash and you will engage the 4 wheel drive constently. If you switch out of 1st or 2nd gear it will disengage automatically. The VTM-4 also works in reverse gear. Hope this helps.

Dec 27, 2010 | 2002 Acura MDX

1 Answer

How do you engage and disengage 4 wheel drive on a isuzu trooper 3.0 year 2000


Hi. On the central console under the air went openings is a line of buttons - triangle-awd-motor heater-rear washer-rear heater... Just push AWD button and you must see a green symbol on the instruments down left corner first blinking and, if gears are switched right, steady lighting. Turn off the same way, but must first the HI-LO lever turn back to HI if you did use the LO gear.

Dec 20, 2010 | 2001 Isuzu Trooper

1 Answer

4 wheel drive will not disengage


take a standard screwdriver apply pressure to the whole switch panel towrds the drivers window then repeatedly push the 2 wheel drive button until the low lock button flashes then keep on pushing 2wheel drive button til it shifts you can tell its out by cranking steering wheel all the way to either end of travel and move foward no binding means your out

Sep 25, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

Stuck in 4 wheel drive and wont come out.


hey there i cant tell you what you are missing but i can tell you how to disengage the front wheels . ok you have a vacum line that runs right under the battery and a line that comes up from the front diff. to the same place ( you may have to remove batt and batt tray to get full access to this) un bolt it and temporaly put batt and batt tray back in start it up and decompress this and see if it comes out .... you should here clunking noise if it goes back in ... if thats the case just pull that big vaccum line off .... to test get all four tires off the ground and have some one put it in drive but dont hit the gas it should turn on its own ...if that dont work check the cable that runs down to the differental

Aug 04, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

4x4 won't engage. light blinks all the time.


The light blinks to alert you that a problem exists in the control module for the 4X4, contact expert Toyota Ed he is the service manager of a Toyota dealer, he knows his stuff

Nov 08, 2008 | 2000 Toyota Tundra

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...