Question about 1993 Ford Taurus

1 Answer

93 ford taurus

Tie rod problem

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 337 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 FORD TAURUS INNER TIE ROD END


They screw on & then are cripped with a special tool

Dec 24, 2012 | 2002 Ford Taurus

1 Answer

I need the tourqe setting for the connection from the tie rod end to the rack & pinion.


tie rod end torque settings. tie rod end and castllated nuts 35-46 ft lbs.

tie rod end jamb nut. 35-46 ft lbs.

rack and pinion. power rack and pinion subframe retaining bolts. 85-99 ft lbs.

good luck!

Nov 06, 2010 | 1998 Ford Taurus

1 Answer

How do I replace tie rods on front passenger side


loosen lock nut. clamp vice grips on inner tie rod to hold it from turning. Then unscrew tie rod end, counterclockwise. count the number of turns so you can screw new one on in same place. get front end alignment.

may need to heat the tie rod end with a torch to break it free from the rust.

soak for a week with penetrating oil first.

Oct 15, 2010 | 1998 Ford Taurus

2 Answers

Inner tie rod end on passenger side needs replaced


its not that hard its just a pain getting access to it as you will find the unit is tight and there is not a lot of room for leverage.

regards JR

May 27, 2009 | 1999 Ford Taurus

2 Answers

Left front tire shakes when applying brakes.


Exact same thing happened to me. On my 03 taurus and 03 Windstar. It ended up be worn inner tie rod ends. Would reccommend an inspection of bushings, tie rods etc.

May 11, 2009 | 2003 Ford Taurus

3 Answers

My 2003 ford tauras shakes so bad on highway


I would have that front end checked as soon as possible. It could be anything, ball joints, tie rod ends, cv joints, could be the rack and pinion steering. If any one of these things break, you will loose your steering.

Mar 10, 2009 | 2003 Ford Taurus

1 Answer

97 taurus GL inner tie rods


You have to have a special tool like this
http://motors.shop.ebay.com/items/Parts-Accessories_Automotive-Tools__W0QQ_nkwZfordQ20innerQ20tieQ20rodQ20toolQQ_fromfsbZQQ_trksidZm270Q2el1313QQ_odkwZQQ_osacatZPartsQ2dAccessoriesQ5fAutomotiveQ2dTools

Disconnect the outer tie rod and remove,then remove boot,then use special tool to remove inner tie rod. You will then have to have it aligned. You can use a tape measure to get it close enough to drive,just mark one of the grooves in the tire so you are measuring the exact same points,measure from tire to tire in the front of front tires then take a measurement at the rear of front tires and adjust the outer tire rods until the measurements are pretty close to equal.

Feb 17, 2009 | 1997 Ford Taurus

1 Answer

Tie rod adjustments


Loosen the locknut and turn the Inner tie rod end , it has a ball and socket inside the steering rack boot. remember to tighten the locknut after servicing !

Dec 18, 2008 | 1997 Ford Taurus

1 Answer

Inner tie rods


you can rent the tools for free when you buy the tie rods from autozone, o'reilly's etc. tool loosens tie rod.

Jun 05, 2008 | 1989 Ford Taurus

Not finding what you are looking for?
1993 Ford Taurus Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...