Question about 2000 Chevrolet Blazer

1 Answer

Purge solenoid location

2000 chevy blazer 4x4 4.3 vortec

Posted by on

  • Anonymous Mar 30, 2014

    trying to find the location of shifting solenoids 1&2 3&4

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

Purge solenoid is on the intake on the passenger side with a plastic line going to it

Posted on Dec 18, 2008

  • mikehumble Dec 19, 2008

    Was this helpful? please rate or give me some feedback.

×

1 Suggested Answer

SOURCE: purge solenoid location

which vehicle are you actually looking for the purge solenoid on? you have 2 vehicles listed in your question. i'll answer both, lol

the locations are described as if you are looking at the engine from the front of the car with hood open.

on the blazer:

it is located on the left side of the intake manifold just under and behind the throttlebody. it is a canister looking device.

on the silverado:

it is located on the intake manifold on the left side in about the same spot as the blazer. providing the silverado has the 5.3 or 5.7 liter engine. if it also has the 4.3 then obviously it will be the same.

hope this helps!

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the purge valve solonoid for a 2000 chevy cavalier?


How do I test a purge solenoid? / Diagnosing an EVAP ...

www.ericthecarguy.com/.../13335-how-do-i-test-a-purge-solenoid-diagn...
My brothers 2000 Chevy Cavalier has a P0440 code. ... the PCM will test the circuit condition of the purge valve solenoid and vent valve solenoid so with the key ...

P0446 2000 chevy S10 4WD Replacing EVAP Vent Valve ...

? 7:54
https://www.youtube.com/watch?v=EVWDc9sM1Co
May 7, 2014 - Uploaded by omar ERA
code .P0446. ... Chevy Truck Hard To Fill Gas Tank - GM EVAP Codes P0442, P0446, P0455 or P0449 ...

EVAP Purge Solenoid Removal - YouTube

? 4:24
https://www.youtube.com/watch?v=Xj605HENFno
Feb 26, 2008 - Uploaded by richpin06a
EVAP Purge Solenoid Removal Saturn S-series. ... Hi, is thispurge can solenoid in the same location for ...

Dec 19, 2015 | 2000 Chevrolet Chevrolet Cavalier Base

1 Answer

Cam sensor location 1995 blazer 4.3


Inside the distributor cap... Hope this helps
2_18_2013_12_26_05_am.gif2_18_2013_12_26_20_am.gif

Feb 17, 2013 | 2000 Chevrolet Blazer

1 Answer

Where is the evap canister located on a 1997 chevy s10 blazer


The canaster it self is located on the drivers side rear of the wheel near the bumper has three hoses connecting to it 1 goes to the rollover valve on the fuell tank 1 to the canister vent solenoid on the member over the spare tire and the other 1 to the canister purge solenoid located on the mid left side of the intake manifold . What codes do you get ?

Jan 28, 2011 | 1997 Chevrolet Blazer

1 Answer

Where is purge solenoid located on a 2000 chevy blazer 4x4?


The Purge solenoid is located between the ICM (ignition control module) and the distributor on the plastic upper intake plenum.

Nov 19, 2010 | 2000 Chevrolet Blazer

1 Answer

We have a 2000 chevy blazer the code 1441 came up


the vacuum switch to the canister purge is at fault for that is what that code is established for

Mar 29, 2010 | 2000 Chevrolet Blazer

1 Answer

Were is the evap located on 2001 Chevy s-10 blazer with v6


The EVAP service port is located in the EVAP purge pipe between the EVAP purge solenoid and the EVAP canister. The service port is identified by a green colored cap.

47e8f38.jpg

Fig. Showing location of (1) Evaporative Emissions (EVAP) Canister Purge Solenoid and (2) Exhaust Gas Recirculation (EGR) Valve


4d7b3e9.jpg

Fig. EVAP Purge valve solenoid (3) mounting bolt (2) and insulator (1) on 2000-2005 4.8L, 5.3L, 6.0L Engines

Hope this help (remember rated the post).

Mar 26, 2010 | 2001 Chevrolet Blazer

1 Answer

I just bought a purge solenoid for my 2000 chevy blazer 2wheel drive 4.3 liter V-6, and I can't figure out where the thing goes under the hood?


It is on the rear left side of the intake (when facing the engine) - Find the EVAP service port and follow the hose to it.

Jul 28, 2009 | 2000 Chevrolet Blazer

1 Answer

Purge solenoid location


which vehicle are you actually looking for the purge solenoid on? you have 2 vehicles listed in your question. i'll answer both, lol

the locations are described as if you are looking at the engine from the front of the car with hood open.

on the blazer:

it is located on the left side of the intake manifold just under and behind the throttlebody. it is a canister looking device.

on the silverado:

it is located on the intake manifold on the left side in about the same spot as the blazer. providing the silverado has the 5.3 or 5.7 liter engine. if it also has the 4.3 then obviously it will be the same.

hope this helps!

Feb 16, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

1,104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...