Question about Ford F-150

1 Answer

Where is the distributor cap located on 2001 Lariet?

Posted by on

  • msalcido_9 Dec 15, 2008

    Thank you!

  • msalcido_9 Dec 15, 2008

    I washed the engine with presure and now missfireing, mechanic informed me of some solutions...



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Raise hood follow wires from spark plugs if it has wires, most of the newer fords have coil packs for each cylinder and are actually mount on the spark plugs, these are prone to failure at some point, The coils break down. they cost around 45.00 each to replace. If you are getting a misfire, generally you will find the one it is by running diagnostics to pinpoint which cylinder it is

Posted on Dec 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1985 GMC k2500 with a distributor cap where is the ignition coil located.

It should be located in the top of the distributor cap.

Hopefully this will give you an idea as to what the cap looks like WITHOUT the coil installed.
BWD Select Distributor Cap

Hope this helps.

Feb 21, 2015 | 1985 GMC K2500

1 Answer

How 2 put back on a distributor cap n where is it located

Depending on what you have you might not even have one but if you do follow spark plug wires to where they all meet up (Distributor Cap) is where they all come together. On the sides of the Cap there should be springs that can be released, if you don't know your firing order then mark with masking tape each wire to where on the cap it goes so you can match it up on the new. Usually you will replace the Rotor as well its under the Distributor Cap in the middle usually you just pull it up and off and the reverse to put new one on. Once you've done this put the Distributor Cap back on and lock springs down. Hope this helps but difficult to answer not knowing what your driving, Engine etc.

Jan 22, 2013 | 2001 Chevrolet Malibu

1 Answer

How do I locate the distributor cap on a 2001 Stratus? I can't even find the spark plug wires!

to get to the rear 3 need to remove the intake plenum also the following link will show how to get to the distributor
Replacing Distributor on 2 5 6 Dodge Stratus

Jul 12, 2017 | 2001 Dodge Stratus

1 Answer

Where is the distributor cap located on a Kia Spectra 2001???

Thanks for choosing FixYa and welcome. All you have to do is follow your spark plug/coil wires to the cap. This is the point where all the wires hook up in the same area, on the cap itself. The plugs plug in to the distributor cap. It should only have a screw or two that comes out to remove it. You might have to take out other parts to change it though. The distributor should be mounted on the edge of the engine, meaning the cap is right beside it.

May 10, 2011 | 2001 Kia Spectra

1 Answer

2001 dodge ram 1500 5.2 v8 van spark plug diagram

firing order is 1 8 4 3 6 5 7 2 standing in front of truck. cylinders on passenger side facing you are 2 4 6 8 cylinders on driver side facing you are 1 3 5 7 now this is your spark plugs wires location on distributor cap.with distributor facing you.2 plugs wire on cap 6 oclock position 1 plug wire on cap 8 oclock position,8 plug wire on cap 9 oclock position,4plug wire cap 10 oclock position,3 plug wire on cap 12 oclock position,6 plug wire on cap 1 oclock position, 5 plug wire on cap 3 oclock position, and 7 plug wire on cap 5 oclock position. in order for this to work you must be standing facing the engine all plug wire location on cap should be correct.

Apr 08, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

Where is the distrubitor cap located on a 2001 dodge neon i drove through a puddle and everyone is saying i need to dry the cap but i dont know where it is located

I don't know for sure either - many newer cars don't have distributor caps. The easiest way to accomplish the task is to trace a couple of spark plug wires back from the engine block to the coil pack or distributor cap - whichever you have. Wipe off any water on whatever these wires go to. If you have a cap, and if you are having rough-running problems, take off the cap and wipe out the inside with a clean rag. Coil packs should be hermetically sealed and the only place for a problem would be right at the spark plug wire connection terminals or possibly at the low-voltage connection.

A quick way to distinguish a distributor cap from a coil pack if you don't know the difference: count the high voltage wires. The distributor will generally have one more than the number of cylinders; the extra goes to a separate coil. A coil pack will wires going to two cylinders in each section, but will never have more high-voltage wires than the number of cylinders.

You should also inspect the air duct, especially the air filter. Dry out any water here just to make sure you don't **** mud into the engine.

Dec 26, 2010 | 2001 Dodge Neon

1 Answer

2001 Chevrolet Blazer spark location

Spark plugs are located on drivers side of engine and passenger side of the engine. Follow the distributor wires coming off your distributor cap. You will not be able to easily access all of your spark plugs from the top. For those pesky hard to reach spark plugs it is advised that you go through your wheel wells. You may have to remove the plastic shroud (or cut a hole in it).

Jun 17, 2010 | 2001 Chevrolet Blazer

2 Answers

Where is locate the camshaft position sensor on 2001 jeep grand cherokee laredo limited 4.7 l

The camshaft position sensor is located inside the distributor. It is a hall effect swich, simply remove the distributor cap and the rotor and you can lift it out, unplug and replace.
Have fun but beware a bad crankshaft position sensor can cause a false cam sensor code to be set sometimes.
Good luck.

Dec 05, 2009 | 2001 Jeep Grand Cherokee

3 Answers

2001 dodge ram 1500 5.9 camshaft position sensor location?

CAMSHAFT POSITION SENSOR 2001 Dodge Truck RAM 1500 1/2 ton 2WD 5.9L SFI 8cyl The Camshaft Position Sensor is located: Under hood, center, upper engine area, rear of intake manifold, mounted in distributor

If this is helpful.Please leave ositive Feedback. Thanks, SnugglePants

Oct 21, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Cam sensor


Dec 15, 2008 | 2001 Dodge Ram Maxi

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers


Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides