Question about 1994 Jeep Wrangler

1 Answer

Electrical help ok so i was working on my jeep that i have as a projet rig and i fixed alot of stuff on it sence i got it and i was doing some work and had the motor running for about half a hour everything was running great and then the motor just shut of and anything that is conected to my key wont tern on my lights tern on becouse the key does't have to be on for them to work and i did't do anything to them cause all i was doing was bleeding the breaks so if anyone has any ideas id be some happy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

First, check battery voltage. Since you've done a lot of work, Perhaps you have something in the charging system malfunctioning or improperly connected. Does anything work with the vehicle jumped or with a known good battery installed? I'd go there first, then start tracing wiring and checking all connections and grounds!

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Wrangler Unlimited. Why does it die suddenly?


Please Help! 2005 Jeep Wrangler Engine Suddenly Stops While ...

www.wranglerforum.com/.../please-help-2005-jeep-wrangler-engine-sud...
Oct 11, 2009 - 30 posts - ‎17 authors ... suddenly stopped on my 2005 Jeep Wrangler TJ while I was driving. ... 20 seconds later, engine suddenly died exactly as it did last week. electrical problem? shuts off while driving
18 posts
Sep 29, 2012
Sudden loss of power
11 posts
Mar 9, 2012
Speedo not working and dies randomly
10 posts
Dec 4, 2011
won't start, won't crank
30 posts
Nov 20, 2011
More results from www.wranglerforum.com

Aug 11, 2015 | Jeep Wrangler Cars & Trucks

1 Answer

None of the Eletrical works on jeep 2004


old post
all electrics dead.
that is a dead battery.
surely head lights work they do , key in pocket.
fix head lights first (path) starting with a voltmeter at the battery
12.6vdc is charged, if ok , check the fuses in the engine bay fuse box called the PDC.

Feb 15, 2014 | 2004 Jeep Grand Cherokee

1 Answer

2001 jeep grand cherokee. Left headlamp (LOW) will not work. Bulb ok, has 11.34 amp to plug but bulb not working.


wires must have a short in them test and track them back till you find where the wires do have power then you will know where the short is.

Feb 01, 2013 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Jeep electric windws and locks


I work for a dodge chrysler jeep dealership,we replace alot of regulators in grand cherokee's,have replaced a few window switches,your dash light problem is more than likely in the head light switch,try working the brightness control and see if that helps

Jan 31, 2010 | 2004 Jeep Grand Cherokee

2 Answers

What can i replace my ccv fresh air hose with sence i can only get it at a jeep daeler an i need it fix fast so i can go an buy the new part that i need


You should be able to get something from an auto parts store that will work. Try puting Jeep Parts into google.

Nov 10, 2009 | 1988 Jeep Cherokee

1 Answer

1995 jeep wangler .drove it home, wont start. replaced fuel pump, new ign switch and crankshaft sensor.


I would have started a little cheaper myself. First, is it a fuel delivery problem or an electrical delivery problem? It could be something like a bad spark plug or wire, a clogged fuel filter. You indicate that you have already spent alot of money...some on a fuel pump and some on an ignition switch and crankshaft sensor. These are all expensive items that may not even be the problem. Check out the cheap stuff first and work by process of elimination. Hope this helps. Good luck.

Jul 07, 2009 | Jeep Wrangler Cars & Trucks

1 Answer

2000 jeep cherokee sport overheating


Disconnect the fan plug and run a jumber wire from your battery to the fan plug. If the fan turns on then its a short or a re-lay.

Mar 24, 2009 | 2000 Jeep Cherokee

1 Answer

Where does the 2 wires from the horn connect to on a 1994 Jeep YJ


You should really have the service manual at hand; they will contain color coding of all of the wiring. Either Haynes or Chilton will have all the electrical diagrams and the most serivce work you can do at home on the mechanical stuff. They cost between 20-30 dollars US and can be had at auto parts stores. 

Many horns are not directly controlled by the horn button but by a relay on which the horn button works. 

Dec 11, 2008 | 1995 Jeep Wrangler

1 Answer

INTERMITTANTLY MOST ACCESSESORIES DONT WORK (BLINKERS, BLOWER MOTOR, HORN, DASH LIGHTS)


I've seen this on alot of Jeeps, they have electrical problems and sadly you may have to take your jeep to an electric shop to pinpoint this problem. With electric jobs it can be a slew of things or just a shortage in a wire somewhere. There is no easy solution except pay an electric shop whatever they charge to troubleshoot and go from there.

Nov 03, 2008 | Jeep Cherokee Cars & Trucks

2 Answers

1999 jeep grand cherokee loredo 4x4


The transfer case is no longer a simple device controlled with a single manual stick shifter.Just like the engine and trans,fuel system,exhaust system,electrical system...etc etc....It is a complex electrical world/circuit all unto itself.There are approximately 2 sensors,two switches,and an electric MOTOR and a computer,that all work in unison to provide the luxuries of "shift on the fly" transfer case abilities.As a complex electrical system,it must be diagnosed as such.Basic steps in diagnosing a problem follows in order of sequence....1:pull Diagnostic Trouble Codes (DTC)'s from the transfer case system 2:For every dtc is a diagnostic route to verify all the electrical sensors and controls and COMMANDS are in place anf functioning. 3: If all external electrical componenets are tested and verified functioning,the last diagnosis is 4: Internal transfer case failure.

Oct 03, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Wrangler Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...