Question about Toyota Corolla

1 Answer

Transmission my transmission moves in 3rd gear

Posted by on

  • ldyonce Feb 01, 2009

    slipping in reverse and shifting real hard into 3rd gear

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

If the transmission is moving back and forth when you put it in and out of gear then you have a broken transmission *****. open your hood, with the car off and in park, rock it back and forth, watching where the most movement is coming from your transmission, like front, back, or the side. Good Lick!

Posted on Dec 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shifter is in neutral. Why is manual transmission stuck in 3rd gear?


Internal transmission breakage has stuck the thing in 3rd gear. Stalls when putting in other gears because transmission is then being put into 2 gears at once. Better look into getting another transmission of having the current unit overhauled and repaired.

Oct 23, 2015 | 2002 Mazda Protege

1 Answer

2007 Chevy Avalanche 3rd and 4th gear are not working


From what you are describing, it is possible either the 3-4 actuator is no longer playing with the 3rd & 4th clutch packs, only way to know for certain is to hook up the good ol' pressure gauge to trans. system, yeah, you think the Chevrolet dealer should know this right?

Sell it now if you can!
Smiles

Mar 02, 2014 | 2007 Chevrolet Avalanche

1 Answer

Only runs in 1st and 2nd gear and reverse.


This is a fault mode in which the transmission either loses electrical power or the PCM deactivates all of the electronics. The transmission will default to max line pressure. The driver will have Reverse and 3rd, with manual 2nd available by putting the gearshift in 2 or 1 (doesn't matter). 1st, 4th, and TCC lockup will not be available. It will not hurt the car to drive it like this for short periods, but use manual 2nd to get the car moving, and be aware that the trans will generate more heat than normal while operating in limp-home mode due to increased torque converter slippage during 2nd gear starts and no lockup in 3rd gear.

Trans shifts into gear harshly, car feels sluggish off the line
, No 1st, 4th or TCC lockup available, Manual 2nd, 3rd and Reverse are only available gears, CEL is on: Transmission is either in limp-home mode or has lost electrical power. If there are lots of error codes in the PCM, check the under hood fuse that powers the transmission, and if it pops again, look for a short in that circuit like an O2 sensor harness touching exhaust. Otherwise, check PCM codes for a particular fault in the transmission causing the PCM to put it in limp-home mode.

No 1st or 4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Car goes into gear but feels very sluggish like the brakes are dragging, but it will roll easily (starts out in 4th gear), you manually shift to 2 to get it moving, once it's moving you put it back in OD and the car shifts 3rd to 4th on its own and locks the converter at the appropriate time: ShiftB solenoid failed: Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.

Dec 14, 2009 | 2006 Hummer H3

1 Answer

92 chevy s10 4x4 4.3L manual transmission no 3rd gear


Hi:

Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse

If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.

Nov 30, 2009 | 1992 Chevrolet S-10

3 Answers

TRANSMISSION 2nd to 3rd GEAR HARDSHIFT


  1. the automatic transmission for bmw 328i 1997 move to front to rear

Jan 29, 2009 | 1997 BMW 328

1 Answer

Cherokee 1998 transmission problem


Hello
Is it the shifter not moving or is it the transmission staying in 3rd gear?
Thanks
RD

Jan 12, 2009 | 1998 Jeep Cherokee

1 Answer

VOLVO S60 2004 D5 3RD GEAR GEARBOX CRUNCH


Sounds as if a synchronizer is going out in 3rd gear, or 3rd gear maybe stripped. I would get it checked by a tranny (transmission) shop before it ended up costing you more money. There is a possibility that there may be some shavings on that gear as well, which would just need cleaned.

Jan 11, 2009 | 2004 Volvo S60

1 Answer

EVERYTIME I SHIFT MY MANUAL TRANSMISSION INTO 3RD GEAR I GET GRINDING SOUNDS....WILL NOT GO WILLINGLY INTO 3RD GEAR...I HAVE TO SLOWLY LET IT MOVE INTO 3RD GEAR.....ALL OTHER GEARS ARE GREAT..TRUCK IS 6...


it is the syncronizers in ur transmision they are worn out so it makes it hard to change gears with out letin the motor fully idle down first

Aug 10, 2008 | 1981 Ford F 150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...