Question about 1993 Toyota Land Cruiser

2 Answers

I have a toyota landcrusier 80 series

I need to remove the ignition tumbler for my 80 series toyota land crusier
thanks Jamie

Posted by on

  • tech44 May 11, 2010

    If memory serves correct it is a contained unit. You will need to purchase a new one. Did you break the key off or is it worn. I have had to make two new keys in the last 10 years. It happens from the key blank that Toyota uses for OEM.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a ignition probelm. i have a petrol and it wont start.checked every thing in the ignition system and its fine. but still wont fire

Posted on Apr 22, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

Turn ignition to acc if you have the key and press the button on the sleeve its a hole in the sleeve with a button.If you dont have the key or it wont release drill the button.

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings


Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees

Nov 22, 2014 | 1996 Toyota Land Cruiser

2 Answers

1999 landcrusier ignition switch does not turn over engine. Get a clicking sound when turning the ignition key.


It sounds like you have a dead battery. Try jump starting the vehicle or take the battery and have it tested and charged.

Sep 23, 2010 | 1999 Toyota Land Cruiser

1 Answer

Land cruiser vx turbo diesel 1990 80 series.


Track down Toyota publication RM184E - a search of the ih8mud forums is a good start to finding it.

Mar 12, 2010 | 1990 Toyota Land Cruiser

1 Answer

Hi my 80 series land cruiser 3f cuts out when i


sounds like crank sensor is getting wet. Don't go through water until you figure out a way to protect it.

Feb 05, 2010 | 1990 Toyota Land Cruiser

1 Answer

IT THE 1990 TOYOTA LAND-CRUSIER,ITS PROBLEM WITH


get yourself a can of silicon spray, spray the rubber window tracks, that will allow some lubrication to the glass and probably sove your problem. i have to do mine a couple of times ayear

Oct 11, 2009 | 1989 Toyota Land Cruiser

2 Answers

Fuel sender unit ohms on a 1991 80series landcrusier


Early FJs had a fuel sender with an ohm range of 2.1ohms when full, to 4.5 when half full, to 6.5ohms when empty. Some may range from 33-240 ohms. You should use a VOM (ohm-meter setting) to measure this resistance value at full, empty and half-full positions. Then you will know what gauge to purchase!!! Hope this helps, thanks for using Fixya.com to help solve your issue. Tater Todd

Jan 28, 2009 | 1992 Toyota Land Cruiser

1 Answer

High CO on state emmision testing


High CO is caused by too much fuel. The carburetor needs adjusted or rebuilt.

Nov 26, 2008 | 1986 Toyota Land Cruiser

Not finding what you are looking for?
1993 Toyota Land Cruiser Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...