Question about 2003 GMC Yukon XL

1 Answer

2003 YUKONXL 2ND SEAT DOES NOT SLIDE ON TRACK,

MY WIFES 2003 YUKON XL, THE 2ND ROW SEAT DOES NOT SLIDE ANYMORE TO ALLOW PEOPLE TO GET INTO THE THIRD SEAT.USUALLY YOU JUST PULL UP ON LEVER,AND THE SEAT SLIDES......CAN ANYONE HELP

Posted by on

  • Anonymous Mar 22, 2014

    I can not flip the back seat up to laydown the seat to allow access to the third row of seats

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

It sounds like one or more of the release cables came undone from your lever. Lift the lever, inspect all around it, look under the seat where the track is. There should be a small round cable that runs from your handle down to the release. Also there may be a thin wire that runs from the left side to the right side. If you find it and reconnect it you should be golden.
Good Luck!

Posted on Dec 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 yukonxl tempture gadges asking up


Had similar problem. Air temp.was 95 degress or more and I was running the ac setting still. Temp gauge went up to 240 or 250. I increased te rpms while sitting still and temp came down. Once I starting moving temp came down to normal operating limit.

Jun 06, 2012 | 2003 GMC Yukon XL

1 Answer

Why is there no power to third row seat?


Power 3RD Row Seat Problems and Tranny Shutter - Ford Truck ...

www.ford-trucks.com > ... > Expedition & Navigator
Mar 27, 2014 - Expedition & Navigator 1997 - 2002 and 2003 - 2006 Ford Expedition andLincoln Navigator SPONSORED BY: ... First the 3RD row seats won't fold down, noclicking, no sounds, nothing. I the fuses are good and there is power at the fuse box, but no power at the motors or switches. Based on continuity ...

3rd row powerfold seat stuck down - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > 2007 - 2014 Expedition & Navigator
Mar 14, 2010 - 3rd row powerfold seat stuck down 2007 - 2014 Expedition ... 2010, 2011, 2012, 2013 and 2014 Ford Expedition and Lincoln Navigator ... I also tried lifting the seat while my wife was pushing the button to raise it, to no effect. There is defnitelypower going to the motor but it just isn't ... Join Date: Feb 2005.

No power to third row seat on 2005 lincoln navigator - Fixya

www.fixya.com/cars/t12295627-no_power_third_row_seat_2005_lincoln
Apr 4, 2012 - no power to third row seat on 2005 lincoln navigator third row seat is ... U will have to replace the entire power seat transmission, there is no ...

Lincoln Navigator Review - Edmunds.com



Apr 04, 2012 | 2005 Lincoln Navigator

1 Answer

Jus t purchased a used 2003 yukon xl and trying to find out how to fold the 2nd row seat down cannot find a lever on the one side


The passenger side 2nd row release lever is at the lower right corner. On the driver side, there is no release lever, just a pull ******** the center of the seat, that sometimes falls between the seat.

Aug 26, 2011 | 2003 GMC Yukon XL

1 Answer

How do i let down the rear seats in 2003 gmc yukon xL


FYI- I'm taking a shot at this one based on my 2003 Montana so take it for what it's worth.
My van seats have a very small level on the drivers side of each seat. Pushing the lever down allows the seats to fold down while pulling the lever up allows them to recline. There is also a small ******** the back side of each seat which when pulled allows them to be folded down.
Hopefully your 2003 Yukon seats are similar to my 2003 Montana seats and this will work for you

Feb 02, 2011 | 2003 GMC Yukon XL

1 Answer

How do you take out third row seats


Follow the numbers on the latches. Step one fold the seat back forward. Step two fold the seat bottom forward. Step three pull the latch marked three towards you while pusing the seat away. This will allow the seat to disengage from the track and you can wheel it towards you and then lift it out of the truck.

May 14, 2010 | 2003 GMC Yukon

1 Answer

Does the back seat of the yukon come out? I can


by the picture it looks like a 2000 to 2004 yukon.
im assuming you are talking about the 3rd row seat?
if so yes it comes out, the instructions are numbered on the seat, 1, 2 3.
if you are talking about the rear seat, inline with the rear doors, they do not come out, only fold down

Jul 21, 2009 | 2003 GMC Yukon XL

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

Not finding what you are looking for?
2003 GMC Yukon XL Logo

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...