Question about Mazda 323

2 Answers

Mazda 2000 astina flat spot on take off. replaced plugs, fuel filter, coil pack, knock sensor. cant seem to fix the problem

Posted by on

  • amytaz10 Dec 30, 2008

    My right hand drive 1999 Subaru is doing the same thing.We replaced sencors and coils and now really confused.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have seen the rotor button cause hesitation on take off, on several different Mazda Astina's.
Not a certainty, but a probable cause regardless.

John Donohue

Posted on Nov 09, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Check the throttle position sensor

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is Mazda Miata stumbling and missing after reaching closed loop?


Check compression. After spark and fuel, compression is next on older cars.

Jul 18, 2015 | 2000 Mazda MX-5 Miata

1 Answer

Why is my Mazda not cranking up?


There is no magic "fix" button for this kind of issue. You will need to perform standard diagnostics on the vehicle to determine the fault.
Begin by reading out stored codes from the ECU to see which sensors were detecting an out-of-parameter condition, then begin your diagnosis from that point.
Things to check:
  • Timing belt;
  • Throttle Position Sensor;
  • Fuel pressure at rail (after changing fuel filter, of course);
  • Condition of spark plug wires;
  • Condition of spark plugs;
  • Operation and condition of coil pack(s);
  • Operation of fuel injectors;
  • Fuel condition (replace ALL FUEL if you suspect contamination).

May 21, 2015 | 2002 Mazda 626

1 Answer

My car is misfiring


I own a 2000 avalon and had a similar issue, rough idle especially when stopped, car felt like it was going to stall. I had a couple error codes which included one of the o2 sensors and knock sensors. I replaced the pcv valve , and o2 sensor, both easy fixes, but tue knock sensor is in the top half of the engine. Cost me 500 bucks to replace, install knock sensor at shop. After knock sensor was replaced and other o2 sensor replaced, no more idle issues. What happens if an o2 sensor on one of

Mar 02, 2014 | 2000 Toyota Avalon

1 Answer

My '01 impala 3.4 v-6 flat spots when COLD, at around 20mph. the idle is ruff with random misfires. acceleration is overall poor. when HOT, most symptoms go away leaving only some slight acceleration...


depending on mileage, but possible tune-up could fix it. if already done then check ignition coil pack and ignition wires also spark plugs, check vacuum hoses for leaks or porous, last injectors clogged - use some techron fuel injector cleaner (wal-mart has them). Also get the throttle body and iac valve cleaned by throttle cleaner . Also this other possibilities are to be checked and confirmed.:---- Engine running rough or misfiring can be cause by the following:

1.Defective spark plugs
2.Inadequate spark/coil, defective spark plug wire.
3. Lack of compression
4.False air leakage.
5. Faulty fuel injectors.
6. Insufficient fuel pressure.
7. Contaminated fuel.
8. EGR valve that is leaking.
9. Oxygen sensors.
10. Throttle position sensor.
11. Manifold absolute pressure sensor
12.Mass Airflow Sensor
13.Idle air control valve

--------- This should help.Keep updated.Thanks.Helpmech.

Mar 27, 2011 | 2001 Chevrolet Impala

2 Answers

How to replace spark plugs on 2000 jeep cherokee classic 6 cyl.? Also does 2000 cherokee have inline fuel filter?


TO REPLACE SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 EXTENSION -SPARK PLUG SOCKET - SPARK PLUG GAUGE.AND TORQUE WRENCH.THE 2000 MODEL JEEPS FUEL FILTER INSIDE THE TANK.1993 - 1996 MODEL JEEPS FUEL FILTER LOCATED LEFT SIDE OF THE VECHICLE NEAR THE FUEL TANK.

Jul 20, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2000 1.6


You may have fuel problem, change fuel filter to see if that helps, if not fuel pump may be going out.

Aug 10, 2009 | 2000 Mazda Protege

1 Answer

Flat spot around 2000r/m


Try accelerating at different speeds, for example push pedal further down, or ease into it real slow & let it climb, and see if it still dies at 2000 rpm, just to see if pedal position makes any difference to see if maybe TP sensor has bad spot.

Mar 27, 2009 | 1991 Mazda 323

1 Answer

2000 jetta vr6 not starting and misfiring


Check the distributor cap if it was not included in coil pack.
Also check the fuel filter replace), injectors (cleaner) and fuel pump.
Please let me know if you need more info
Good Luck

Feb 11, 2009 | Volkswagen Jetta Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...