Question about 2007 BMW X3 3.0si SAV

Open Question

Codes On s 2007 X3 the 4WD and ABS indicators are on ABS codes are 24377 24378 24310 and the VTG codes are 21956 21603 21968

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the ABS light and ESC light on in my 2007 Kia Sportage


ABS light is on because one of your wheel sensors is going bad. It is usually tied into the hub and you bearing is going bad. Listen for a grinding sound and that would indicate a bad bearing.

Dec 15, 2015 | 2007 Kia Sportage 4x4 V6

2 Answers

What to do if the ABS light comes on and stays onl


Usually indicates a problem in the ABS. Take it to get looked at if you want it fixed. If its faulty you risk your breaks locking up. Ive been driving with my ABS and trac off light on for over a year, but Id still get it fixed if i could.

Mar 15, 2015 | 2007 Mazda 3

1 Answer

Why does the Traction Control Indicator stays ON 2007 Chrysler Pacifica


Could be one of your wheel speed sensors is out. The ABS and traction control are linked on most vehicles so when the sensor is bad it will disable the traction control. The best thing to do would be to get it scanned and see what code the computer is throwing.

Jun 25, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

Pajero ABS and 4 WD Indicators


check abs sensors on all tyres also check the abs rings for any dirt.

May 24, 2014 | 2007 Mitsubishi Pajero 3.8

1 Answer

What is the code C101F?


Testing the ABS sensors on 2008 Chrysler Town and Country

Code C101F indicates that there is a failure or fault with the ABS speed sensor or with the sensor wiring/plug. The above video explains about the sensor ( this is general info about the sensor)...

May 13, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Just got my oil changed and the day after my vsc lights come on- any connection?


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 22, 2012 | 2007 Toyota Camry

1 Answer

2007 gmc yukon my abs and stabiltytrak light came on


Whenever this warning or any other stays on in the dash it is indicating that the systems control module has detected a fault, it then disables the system as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Sep 28, 2012 | 2007 Chevrolet Tahoe

3 Answers

Abs brake light stays on when engine is running 2007 dodge ram 1500


The abs engine light comes on to let you no that the abs brakes are on.

Jan 04, 2011 | 2007 Dodge Ram Truck

1 Answer

My stabilitrak and abs light come on in my 2007 equinox, what is the problem?


YOu need to take it to a shop immediately the stabilitrax and the abs indicators has to do with your car being stabilized and the abs has something to do with your brakes. Hope this helps!?

Please rate solution - Thanks.

Apr 19, 2010 | 2007 Chevrolet Equinox LS New Cars

1 Answer

ABS light


It is picking up a signal from one of the wheel sensors probably.

Go here to read files on ABS issues

http://autos.groups.yahoo.com/group/villagerquest/

  • Anti-Lock Brake Warning Indicator Always On
  • Fuse(s).
  • Circuit.
  • Hydraulic solenoid relay.
  • Hydraulic pump motor relay.
  • Brake anti-lock sensor(s).
  • Hydraulic anti-lock actuator assembly.
  • Anti-lock brake control module.
  • GO to ABS Quick Test .

QT5 PERFORM ABS TROUBLE CODE RETRIEVAL
  • Key OFF.
  • Jump Pin 4 of the data link connector to ground.

    5939e8a.gif

  • Key ON.
  • Observe the anti-lock brake warning indicator.
NOTE: The first code to flash will be the start code (12). Also, each code is repeated three times before proceeding to the next trouble code.

Does the anti-lock brake warning indicator flash codes? Yes No RECORD code(s). GO to the following ABS Trouble Code Identification Chart in this section and PERFORM Pinpoint Test specified for first code retrieved. If indicator is illuminated constantly, GO to Pinpoint Test D1 . If indicator is not illuminated, GO to Pinpoint Test A1 .


df42bc3.gif

Jan 02, 2009 | 1993 Mercury Villager

Not finding what you are looking for?
2007 BMW X3 3.0si SAV Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...