Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Truck starts but will not idle

I have a 2000 f250 V10 and it will start but will not idle, stalls out unless I keep the idle up with the gas pedle

Posted by on

  • yadayada
    yadayada May 11, 2010

    HAVE U CHECKED THE OPERATION OF THE IDEL SPEED CONTROL VALVE ON THE SIDE OF THE THROTTLE BODY? UNPLUG IT AND SEE IF THERE IS ANY DIFF IN THE ENGINE SPEED WHILE HOLDING THE IDLE UP ENOUGH TO KEEP IT RUNNING.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 37 Answers

IT COULD POSSIBLY BE THE INTAKE GASKETS. FORD HAS A PROBLEM WITH THE GASKETS GOING BAD. IF THE CHECK ENGINE LIGHT IS ON AND GIVING YOU CODES PO171 AND PO174 I WOULD CHECK THE GASKETS BY SPRAYING CARB. CLEANER AROUND THE INTAKE WHILE THE ENGINE IS RUNNING. IF THE IDLE SPEEDS UP THEN THAT IS YOUR PROBLEM.

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine runs rough, no power, stalls


you may need to get your fuel filter replaced

Jan 28, 2014 | 1991 Ford F250

1 Answer

1999 F250 V10 where is the pressure regulator


Im pretty sure this is it. :::1b851a65-ce94-4055-9690-fdc7ed5bc3a1.gif
LOWER LEFT.

Dec 04, 2013 | Cars & Trucks

1 Answer

Car will not start without pressing gas pedal to keep idle speed up. If I keep idle at 900 RPM or higher it runs as long as foot is on gas pedal. It then stalls out when I take foot off gas pedal. No...


Have the idle bypass valve checked, also called idle air control valve.
If that valve is stuck in the closed position, it's not allowing the fuel to bypass the throttle plate to keep it idling, resulting in stalling, but will keep engine running if the pedal is pushed down.

May 14, 2010 | 2000 Toyota Camry Solara

1 Answer

1992 Ford F250 Truck with start and idle problem


Could be many things, Check the EGR valve and make sure its not stuck open, Oil pressure low is probably due to rough idle or low RPM. Also may have restricted cat converter.

Mar 16, 2010 | 1992 Ford F250

1 Answer

My 88 s10 cranks but unless i pump gas pedle it shuts off. changed fuel filter and throtle body sensor still wont idle .press gas pedle it stalls out must pump pedle to keep it running


what engine does it have? 2.8 ? if so replce pick up coil in distributor /4.3 and 2.5 will do this also it affects pulse to injectors and on time firing

Jun 30, 2009 | 1988 Chevrolet S-10

1 Answer

F250 won't idle properly.


idle air control valve or
idle air control motor is possible

same thing but diff parts stores call it diff name

Jun 26, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Wont idle


sounds like dirty fuel check your fuel filters see if ther blocked

Jan 07, 2009 | 1991 Ford F250

1 Answer

Stalls when cold does not idle when first stared


IAC solenoid (Idle Air Control) is not working and remains closed .... air is passing thru the main air intake duct , opened by pedal ... and not by the air bleed conduct (must open while main must be closed .. Pedal Depressed.) Check IAC Solenoid and connectors. Replace if need....

Oct 18, 2008 | 2000 Daewoo Lanos

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

827 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...