Question about 2003 Hyundai Tiburon

1 Answer

Alarm wont shut off after replacing battery

2002 Hyandai Tiberon, replaced battery, alarm won't shut off. also. door unlocker dosen't work. alarm only goes off when key in on. tried unlocking manualy while extra key in egnition.

Posted by on

  • graafx Dec 19, 2008

    it's not my car, it's my sisters. it was left without power for some time. days if not weeks. it's a stock alarm. I'm wondering if the immobalizer is the cause for the alarm. and the door remotes won't work because they need to be reprogrammed because it was without power so long. I don't know, just guessing.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

How long did it take you to replace the battery? If you did a quick switch, try disconnecting it again and leave for 10-15 minutes. Maybe it will reset? Did you replace the battery before it went completely bad? Is this a stock alarm?

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panic alarm does not work. Locksmith verified that it is not the remote fobs.


central timer module" - Dodge Dakota Forum

www.dodgedakota.net/boards/gen/21983.html

Jan 2, 2009 - 21 posts - ‎18 authors
I have a Dak 2000 3.9 Ltr V6, Single Cab, Bare Bones. ... Panic Mode .... ooops....i mean the remote entry and alarm system does NOT work ... i have a 2002 dakata where can i buy a ctm looked all over nobody sell them can thay be rebuilt ... I was out the door $550.00, and they washed the truck also.

Truck wont work/Key Fob won't work/wont start/wont do anything ...

www.ramforumz.com > ... > Electrical

Apr 10, 2010 - 10 posts
Truck wont work/Key Fob won't work/wont start/wont do anything! ... Maintenance & Repair > 3RD Generation Dodge Ram - 2002 to 2008 Dodge Ram Trucks > Electrical... Soon as I manually unlock the door, and open it.... the factory panic alarm starts going off. .... Vehicle: 2004 Dakota Club Cab 4X4.

alarm going off when opening the door.. embarrassing and annoying ...

www.cumminsforum.com > ... > 3rd Gen. Non-Powertrain

Jan 12, 2012 - 11 posts - ‎9 authors
how do I stop my trucks alarm from going off when I open the door? it did it ... to thetruck and opened driver door (it was unlocked) and the alarm started going off. ... I do not have a remote unlocking device (or it doesnt work) so I do all .... alarm will go off then I have to use the FOB panic button to shut it off.

Keyless entry/panic button/alarm - Dakota Durango Forum

www.dakota-durango.com > ... > Gen III Dakotas

Jan 10, 2016 | 2002 Dodge Dakota Club Cab

1 Answer

How do I reset my car alarm for 2002 ford explorer? replaced battery and now the alarm wont turn off


With your remote unlock the door if you dont have a remote with your door key unlock the passager door and the rear hatch

Mar 10, 2015 | 2002 Ford Explorer

1 Answer

2006 Toyota Sienna battery replacement causes alarm to go off


if you dont have the keypad to shut the alarm off, or put the key in the door first and unlock the car, then you are going to have to get the alarm disconnected

Nov 24, 2012 | 2006 Toyota Sienna

1 Answer

Both key fobs with new batteries dont respond. I set the alarm off when i manualy open the door and alarm wont allow me to start car for more than two seconds. What do i do??


The question is .... Did you get the keys wet? I know you won't want to hear this but if you replaced the batteries and they are still not responding then either the batteries are dead from new or you will need to replace the key(s) through your chrysler dealer ( very expensive). I also had a similar problem with my 08 Avenger where I replaced the battery on my key and it would unlock the doors/turn off alarm but when I started the car it would only run for a minute then shut off. Luckily I had the second key that was operational so I could make it down to have my key replaced that was bad. Hope this helps.

Aug 19, 2011 | 2006 Chrysler 300

2 Answers

2003 Monte Carlo SS, FOBS won't unlock doors (new batterries), use key and open the door with the door open FOB will lock and unlock the door, shut the door and the FOB won't lock the doors. After...


If the passkey is messed up, there will be a light on the dash that says security, or have a picture of a car with a lock thru it. If there is no light when the key is turned forward, then its NOT a passkey problem.



tayjoejoe_35.jpgtayjoejoe_36.jpg

Aug 17, 2011 | 2003 Chevrolet Monte Carlo

1 Answer

Hello I hope you can help me. I have a 2002 Toyota Sienna Van. Park van - was running great. Snow came, let van sit one day. following day tried to start van. Van will not start, closed the door and...


some will reset by locking and unlocking the door with the key.....or .need to replace the battery in the car it is dead and when u try to reset it trips again because it is dead

Nov 27, 2010 | 2002 Toyota Sienna

1 Answer

I have a 2003 Hyundai tiberon SE. Recently the


the bulb is not working because the fuse is probably dead. (check by the drivers leg side for the fuse box). Door locks will not work because the alarm system needs to be repaired, or replaced. I donot know what to do with the cruise control. and your seatbelt sensors need to be replaced.

Nov 18, 2009 | 2003 Hyundai Tiburon

1 Answer

1998 cad alarm no start


Your GM product has a safety alarm, it shuts down the radio , or locks it.
I send ours to a GM dealer to get it unlocked. They don't give those codes out.

Jan 15, 2009 | 1998 Cadillac DeVille

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...