Question about 2002 Ford F250 Super Duty SuperCab
The door pressure was in and latch lubed to no avail!! Is there a trick by taking out the circular rubber stopper to the left of it and releaeing it that way?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there's a cable that runs from the door mech up to the top latch, need to pull down on this cable to release the top latch. Only way I could pull down enough to release was through the hole just left of the opening for the mech...cable is attached to the door frame with plastic tie wrap...pop this out so the cable is free in there and then just pry down with a screwdriver...make sure your pulling the handle at the same time. Once the door is open, it's easy to see what happening, most likely the cable is stretched out too much. I just ordered the part from Ford, the cable and top latch come as one part...about $60.
Posted on May 03, 2009
2000 FORD SUPER DUTY 5.4 HOOD STICKS.YOU CAN HAVE AN ASSISTANT PULL THE HOOD CABLE AND EASILY OPEN THE HOOD BUT THE HOOD WILL NOT POP UP ON ITS OWN..ANY ADVISE?
Posted on Nov 05, 2009
SOURCE: The rear latch/handle on our
Here's how I repaired mine. Go inside and remove the plastic 2" square plastic cover. By pushing on the lever inside this area, the latch will release. Push on the door at the same time, when the latch is pushed. With the door open, remove all four screws from the plastic panel. Now pry carefully the big plastic panel off the door. There are plastic snaps holding this on, all around the edges. Now there is another metal cover over the latch mechanism under this panel. Remove this. You now can see into the latch area and put the handle back into the slot where it came out of. You'll see that the ends of the handle can be put back on the round bar, but to hold them in place, I attached 2 nylon ties on one end. You can also purchase a metal push on retainer from the local hardware store. Mine has been repaired for 8 months and had no trouble. Ford used no retainer on these handles and after prolonged use, they bend and the handle can be pulled off. A twenty minute job. Your wife can even do it.
Posted on Jan 03, 2011
Tips for a great answer:
Sep 13, 2014 | 2002 Hyundai Santa Fe
Apr 15, 2017 | 1988 Jeep Wrangler
Oct 02, 2010 | 1996 Jeep Grand Cherokee
Mar 14, 2010 | 1994 Jeep Grand Cherokee
Sep 17, 2009 | 1993 Jeep Grand Cherokee
Jun 16, 2009 | Nissan Pathfinder Cars & Trucks
May 08, 2009 | 1987 Jeep Cherokee
Jan 03, 2009 | 2006 Kia Sedona
Oct 04, 2014 | 2002 Ford F250 Super Duty SuperCab
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: