Question about 1998 Buick LeSabre

1 Answer

98 Buick Le Sabre interior lights come on and stay.

Driving at night the interior lights came on. I had to pull the fuse to get them off. The "Light Minder" feature should turn them off if left on too long. It now does a reverse of that. Where does the "Light Minder" function come from, a module? a part of the computers system? What should be replaced to get it to work properly?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

Dome light Switch is ONE in Itself Your Symptom Says to ME Dome/LT/SW Pop it out put the fuse back in and if problem still exists try First to turn dial Vigorsly then Check If no proper Function UNPLUG It Lights go off then I Would REPLACE SWITCH. it is NOT connected to any ECM or PCU.

If This Information ih or HAS Helped you PLEASE EXPRESS IT BY Not Forgeting to RATE ME
Thank youVery Much rejakwilson

Posted on Jan 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the injector relay on 98 buick le sabre?


The relay for the fuel injection system is under the hood in the fuse and relay center. The underside of the cover has location info on it.

Jun 01, 2016 | Buick Cars & Trucks

1 Answer

The starter on a 1990 buick le sabre clicks once when trying to start but won"t start


if the starter justs clicks once and all the lights stay bright i would say the starter is going bad. sometimes as a test ,you can tap the starter and if it works, it points to a bad starter

Jan 27, 2013 | 1990 Buick LeSabre

1 Answer

Engine light ON DASH pops up while driving and it says--SECURITY AND THE BUZZER CHIMES EACH TIME. .DRIVE A FEW BLOCKS AND IT GOES AWAY. WHAT CAN i DO TO CORRECT THE PROBLEM? i AM NOT AN EXPERT DO IT...


First you need to locate your fuse box i can help if you don't know where it is. Look for the diagram and find the alarm fuse and pull it. Another option is if you know where the alarm is to unplug it and it should stop. Let me know once you have tried this thank you.

Derek Carden

Dec 27, 2011 | Cars & Trucks

1 Answer

My 1998 le sabre blinker (left and right) dose not work but the fuse is good and it worked last night


check your hazard lights if they work then the switch needs to be checked if hazards dont work then replace turn and hazard relay unit under d/s dash

Jan 15, 2011 | 1998 Buick LeSabre

1 Answer

Starting diagram for a 1994 buick La Sabre


Hi
'98 le sabre v6 3800. Dead key intermittent, ie no start, no noises.
New starter
new ign switch
earth checked
park inhibitor possible, but checked
where is the starter relay if there is one?
what else do you suggest?
Is there an immobiliser?

Aug 27, 2010 | Buick LeSabre Cars & Trucks

1 Answer

I need to replace the 3rd brake light for a buick le sabre 1994


Remove the 2 screws holding on the back cover, pull back, take light bulb, turn and remove and replace with new one, Put cover back on

Dec 22, 2009 | 1994 Buick LeSabre

1 Answer

All the lights in the rear is out on my le sabre


check the fuse and if it is ok then check the brake light switch for power if it has power you need to get a jumper wire and check the rear light to see if they function if so then the switch is bad ,but make certain it is the brake lamps and not the driving lamps.

Dec 11, 2009 | 2002 Buick LeSabre

1 Answer

Buick Le Sabre 2000 Cruise will not stay on when pressed


Had the same problem..You do not have to pull the fuse 1st...I used a screw driver (handle with care) to get the switch out. Pay close attention to the way it come out because the wires are real short..When you get it connected you can just push it back into the hole without much problem

Sep 28, 2009 | 2000 Buick LeSabre

1 Answer

96 Buick roadmaster= interior lights stay on while driving


Check to see if the over head light has shorted to ground. EG: touching roof, from weight being put on the roof. EG: Cargo hauler.

Jun 01, 2009 | 1996 Buick Roadmaster

Not finding what you are looking for?
1998 Buick LeSabre Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...