Question about 1989 Ford Thunderbird

1 Answer

Where is ported vacuum switch on a 1989 thunderbird

Where is the ported vacuum switch 1989 ford thunderbird 3.8

Posted by on

  • 1 more comment 
  • tpage43 Dec 13, 2008

    Evidently its the one to do with the reason the car is running poorly. My son took it to the shop and they said thats what is causing the car to run bad.

  • yadayada
    yadayada May 11, 2010

    There is a vcuum diagram under the hood, I have no idea which one without knowing where it ends up off the ported vacuum source on the intake manifold.

  • yadayada
    yadayada May 11, 2010

    which one, what system?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 106 Answers

If you go to your local autozone, o'reily, or advanced auto and tell them what you need..a ported vaccum switch they will sell you one and most of the time you can take that and look at it and tell were on top the motor it goes.. i have a 1990 3.8 good-luck ray

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dash and blinkers for 1989 Ford Thunderbird


The dash lights should work in any position. If you mean the warning lights, that and the turn signals go thru the key switch, so that could be a problem with that switch.

Jul 03, 2013 | 1989 Ford Thunderbird

1 Answer

Does a 1984 ford thunderbird have a batteryfuse or relay


No, if your not getting any power and the battery test good check your ignition switch or starter solenoid.

Feb 27, 2011 | 1989 Ford Thunderbird

1 Answer

My blinkers dont work on my 1989 Ford thunderbird I have changed the flasher and the turn single switch what else is there to do


is the lever that reaches into the steering column loose or "floppy" feeling? if so it could be a broken turn signal cam. a circular device inside the column beneath the steering wheel

Sep 10, 2010 | 1989 Ford Thunderbird

1 Answer

Location of low pressure port of a/c system on a 96 ford thunderbird


Here is a system overview. The low side port is #5 in the picture. Hopw it helps ya.. Cobra
be966ed.gif

Item Part Number Description 1 19972 A/C Compressor to Condenser Discharge Line 2 19E762 A/C Charge Port Valve(High Side) 3 19D594 A/C Pressure Cut-Off Switch 4 19D742 Evaporator to Compressor Suction Line 5 19E762 A/C Charge Port Valve(Low Side) 6 19E561 A/C Cycling Switch 7 19860 A/C Evaporator Core 8 19C836 Suction Accumulator/Drier 9 19835 Condenser to Evaporator Tube 10 19D734 A/C Manifold and Tube 11 19703 A/C Compressor 12 19712 A/C Condenser Core

Jun 12, 2010 | 1996 Ford Thunderbird LX

1 Answer

I have a 1989 ford thunderbird sc i need to find the engine wiring and vacuum diagrams ......... any ideas



Best thing to do is purchase a haynes or chilton or both, For your year Tbird.

Sheilah

Mar 15, 2010 | 1989 Ford Thunderbird

3 Answers

Where is the OBD1 port located on a 1993 Ford Thunderbird??


On a OBD I car the connector is under the hood on the drivers side near the strut tower. It will be in a plastic cap marked EEC-TEST and have two connectors one with a rectangular shape that has a sort of pointed side and 4-6 wires in it and then a single wire with a gray plastic end on it.

Hope this helps

Mar 30, 2009 | 1989 Ford Thunderbird

1 Answer

Need lights wiring diagram for my 89 Thunderbird


I actually have the complete wiring diagrams for 1989 Fird Thunderbird. What specifically do you need.

Mar 24, 2009 | 1989 Ford Thunderbird

1 Answer

1989 ford thunderbird std brake system vacuum booster install?


There are a Couple of Different Variations on the Boosters. Make sure that you have the Correct one First. If you do, Just work it, Some of the Rods are Removeable by the Way.

Jan 21, 2009 | 1989 Ford Thunderbird

3 Answers

1989 ford thunderbird standard brake system has hard pedal


I would think the power brake booster has failed, do u hear any hissing when u press the brake pedal?

Jan 16, 2009 | 1989 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...