Question about 2004 Land Rover Range Rover
We have the same problem, have you found a solution
Take out fuse in glove compartment mine did the same it the fuse to the monitor it came back on.
Posted on Jul 09, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There is a problem inside the radio and a specialist needs to strip and repair if possible.Check with your dealer if they know someone to do this.
Posted on Dec 04, 2008
SOURCE: radio display
If the radio is of the newer LCD variety and most of them are of this type the reason would be because behind the display are usually 3 small lamps /light bulbs used to backlight the display and they are probably all burnt out and need to be replaced. This job cannot be done by most people and best repaired by an electronic technician with a soldering tool.
Posted on Dec 02, 2008
Tips for a great answer:
Feb 28, 2018 | 2004 Land Rover Range Rover
Mar 10, 2011 | 2006 Land Rover Range Rover
Switch ignition OFF
Press and Hold left instrument panel reset button, switch ignition ON to position 1
Keep reset button pressed for approximately 5 seconds until the LCD displays "RESET SIA".
The distance to service and the service type " Inspection" will be displayed.
To reset distance the left hand button should be pressed before the 'RESET' message has
flashed 5 times. The LCD will display 'END SIA'. Switch ignition off
The timing to do this is must be about 5 seconds, if this is not working you can try again.
I have a Range Rover 2005 and it worked for me.
Nov 13, 2010 | 2004 Land Rover Range Rover
Oct 21, 2010 | 2004 Land Rover Range Rover
Mar 24, 2010 | 2002 Land Rover Range Rover
Aug 21, 2009 | 2005 Land Rover Range Rover
Dec 02, 2008 | 2004 Land Rover Range Rover
649 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: