Question about 2006 Chevrolet Malibu
Have P0499 code.
where is vent valve solenoid?
Its above ur fuel tank from what i kno of but it could be ur canister or just a short in the wire to ur solenoid
Posted on Jan 17, 2009
2006 dodge ram 1500, The ECM detected an open circuit condition on BB the NULD ciruit. How do fix this problem
Posted on Apr 11, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 03, 2016 | Cars & Trucks
Nov 10, 2015 | 2006 Jeep Commander
An EVAP canister, vent hose, or vent solenoid valve that has restricted flow may cause this DTC to set. Using a purge solenoid command with a scan tool will allow vacuum to be applied to the system instead of pressure. With the engine running, the EVAP canister vent solenoid valve open, and the EVAP canister purge solenoid valve commanded to 100 percent, the fuel tank vacuum should not increase to more than 5 inches H2O.
An EVAP canister filter that is restricted can cause this DTC to set. Refer to Evaporative Emission Canister Replacement .
Disconnecting one component at a time while the EVAP system is under flow will help to pinpoint a restriction in the system
Do you have a scan tool that reads data PID'S ?
Your FTP - fuel tank pressure sensor could be at fault !
Sep 06, 2015 | Chevrolet Impala Cars & Trucks
EVAP Vent Control Solenoid Circuit Malfunction
Vent solenoid circuit open, shorted to ground or to power (B+).Vent control solenoid is damaged or has failed..PCM has failed.TSB 00-060 (7/00) contains information related to this code.Trouble Code: P0455
EVAP System Gross Leak (0.080") Detected
.EVAP control system pressure sensor is damaged or has failed.EVAP purge solenoid or canister vacuum line loose or off.EVAP purge solenoid is damaged or has failed.EVAP emission canister is dirty, restricted or full of water.EVAP canister vent control valve is damaged or has failed.Fuel tank cap loose, missing or it is the wrong part number.Fuel tank temperature sensor is damaged or has failed.Fuel tank vacuum relief valve is damaged or has failed.Large leak in the EVAP canister or in the fuel tank area.ORVR system is damaged or has a large leak in a component.Refueling control valve is damaged or has failed.Vacuum hose leaking between intake manifold and Purge valve.Here are the codes,take part back and get refund.
Dec 03, 2012 | Cars & Trucks
NVLD Canister Vent Solenoid Circuit High
NVLD canister vent solenoid control circuit is open or is shorted to power.NVLD canister vent solenoid ground circuit is open.NVLD canister vent solenoid is damaged or it has failed.PCM has failed.Mr. Perkins,here are the causes for the code.
Nov 28, 2012 | Cars & Trucks
May 30, 2012 | 1998 GMC Jimmy
Evaporative Emission Control System Vent Control Circuit Malfunction
What does that mean? Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.
Symptoms There will be no obvious symptoms to driver, other than MIL illumination.
Causes A code P0446 could mean one or more of the following has happened:
May 14, 2011 | Isuzu Rodeo Cars & Trucks
Mar 29, 2010 | 2003 Dodge Dakota Club Cab
Aug 13, 2009 | 2004 Dodge Dakota
Jun 24, 2009 | 2004 Dodge Dakota
3,647 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: