Question about 1999 Saab 9-5

1 Answer

No low or high beams

I have 1999 9-5 saab and my low or hi beams wont work, fog lights work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 76 Answers

Check the light control unit (looks like a relay) in the main underhood fuse box. The solder joints may be cracked and can be resoldered. This tutorial explains the procedure for a new gen 900 (very similar to yours).

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a dirt bike with headlight. Three wires for hi/lo, how do I put two fog lights in place of that head light without too much wiring work. I don't need hi/lo option


one wire will for high beam
one wire will be for low beam
the last wire will be ground wire
as fog light have only one beam you can use the low beam wire and parallel wire it to the fog lights
that way you have the head lights still and the fog lights as accessories correctly wired according to regulations
how to do it simply-- find the low beam power wire ( light switch on low beam and power at the light bulb check ed with a multi meter set on volts
solder , piggy back, or double plug in a connection into that wire and run one wire to the left fog light and one to the right fog light connect each fog light to an individual ground wire and connect those wires back to the ground wire for the main lights
Now having done that simple addition to the lighting system another problem has come up
The wiring will now be too light to carry fog light current and or the light switch will burn out
To over come this problem, the circuit needs a relay
fit a relay on the bike and now run the low beam wire to a terminal of the relay
run the other terminal wire to ground
this enables the relay to operate when the low beam is switched on but at this will not switch on the lights yet
now you have to run a heavy gauge wire (fused at the battery) to one of the power terminals of the relay and from the other power terminal to the connection for the fog and low beam lights
Now it all works switch on the high beam and no for lights
change to low beam and the fog lights come on as well
All nice and legal
Of course if you don't care about being legal just buy a 30 amp toggle switch and run a fused wire directly to the switch from the battery to the lights and then to ground from the lights
You will know that the generator / alternator for the bike will not be able to run the fog lights with or without the main lights so what will you have achieved

Feb 28, 2016 | Cars & Trucks

1 Answer

Replace headlight relays 1999 lexus rx300


Moe likely a bad earth for one of the lights as one light is working through another causing one to stop working

Feb 06, 2013 | 1999 Lexus RX 300

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

Saab 95 headlights dont work high work and drive lights stay on


IF THE BULBS ARE OK CHECK THE HEADLIGHT MODULE(IT LOOKS LIKE A RELAY, ORANGE CASE I THINK) TRY WIGGLING IT,IM PRETTY SURE THATS IT. THEY GO BAD ALOT ON SAABS. IT SHOULD BE IN THE ENGINE CONPARTMENT

Jan 30, 2009 | 1999 Saab 9-5

1 Answer

I want to use fog lights with high beams


hi,
you could just run a possitive wire from the back of your high beams straight to your fog lights then earth the fog lights stright to the car. this will work just make shure you disconnect your battery before playing with the wire's. if your not sure what you are doing i would recommend you take it to an authurised electrican. as for the high and low, same system but i would say it probably would over load the fuse creating more work for you.

Jan 05, 2009 | 1998 Honda Passport

2 Answers

High beams wont turn on.


First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill

Nov 19, 2008 | 2004 Ford Explorer Sport Trac

Not finding what you are looking for?
1999 Saab 9-5 Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

rgbypoet

Level 2 Expert

161 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...