- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you need to know the fuel pump relay of your Hyundai Sonata, then here I have mentioned the video which shows you 07 Hyundai Sonata 3.3 fuel pump relay location, have a look
For 2002 Hyundai Sonata 2.7L MFI
DOHC 6cyl check this procedure... Alternator - Removal
Before servicing the vehicle, refer to the precautions in the
beginning of this section.
Remove or disconnect the following:
Negative battery cable
Radiator mounting bolts, 1.6L only
Alternator drive belt
Alternator wiring harness connectors
Alternator. It may be necessary to raise the radiator
Fig. Exploded view of the alternator-XG 300
Removal & Installation
Before servicing the vehicle, refer to the Precautions section.
Remove or disconnect the following:
Negative battery cable
Alternator drive belt
Alternator wiring harness connectors
Alternator. It may be necessary to raise the radiator
Before servicing the vehicle, refer to the Precautions section.
Remove or disconnect the following:
Negative battery cable
Radiator mounting bolts, 1.6L only
Alternator drive belt
Alternator wiring harness connectors
Alternator. It may be necessary to raise the radiator
Install or connect the following:
Alternator and reposition the radiator, if raised
Alternator wiring harness connectors
Alternator drive belt
Adjust the alternator belt and torque the bolts to the following
specifications:
Accent: Pivot bolt to 14-18 ft. lbs. (19-25 Nm) and adjustment
bolt to 14-20 ft. lbs. (19-28 Nm).
2.0L and 2.5L Sonata, Elantra and Tiburon: Pivot bolt to 14-18 ft.
lbs. (19-25 Nm) and adjustment bolt to 105-132 inch lbs. (12-15 Nm).
2.4L Sonata: Pivot bolt to 26-41 ft. lbs. (34-54 Nm) and the
adjustment bolt to 14-18 ft. lbs. (19-25 Nm).
3.0L Sonata and XG 300: Pivot bolt to 14-18 ft. lbs. (19-25 Nm)
and adjustment bolt to 11-16 ft. lbs. (15-22 Nm).
Answer
Use a large wrench to take tension off of your serpentine belt and remove the belt from the alternator, (just the alternator). Disconnect the wires. Remove the bolts then the alternator. Put new alternator in place using old bolts. Replace wires (may only be one wire, depending on the alternator). Get your large wrench back out, put the belt back on the alternator, and your good to go. this should do it.
×