If it is the blower motor that isn't working you shouldn't have cold air blowing out either, if that is not the case, and you have cold air blowing out the vents I would guess that it's a problem with the blend doors. They redirect the flow of air to change the temp.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the Compartment filter is clear and there is not a Dirty Fuse or Relay Pins to the Blower motor Unit. In the end it could be the blower motor on the way out, or contaminated internally with dust and debris.
Hello Callahan5922....this sounds like a stuck blower motor resistor. I assume the blower won't function in the a/c mode either? If you have a digital multimeter you can check this. I believe it's fuse #2....if the digital indicator goes up or down when you increase or decrease the fan speed thats good. Locate the blower motor resistor....you wil find it located on the fire wall behind the right valve cover hiding behind the heater hose, it's about the size of a cigarette pack. With the engine off, and key in on position, turn the A/C on High, and rap a tap tap tap on the resistor. You might be suprised when the blower motor takes off a runnin, I hope this is the answer you need and i was able to help solve this for you. Good luck...