Question about 2003 Buick Rendezvous
Power windo driver side dose`t go or down i can her motor running in dooe
I had the same problem with mine. It ended up being a bad driver's window button. You have to replace the entire drivers side window control panel. One way to check if yours is bad is with a multimeter, or ohmmeter. Just take a small screwdriver to the side of the control panel (Entire panel...not just the button) and pry it up. It will pop out with a minimum amount of force. Next, disconnect the wiring harnesses from it and remove the panel. Make sure the car is off with the keys out before you do that. Check the continuity between the 3 pins on the underside of the button in question. You should have less than 1 ohm between the center and bottom pin when the button is in the down position and the same on the middle pin and upper pin when the window is in the up position. If you have anything more than 1 ohm, the panel is bad and the entire thing needs to be replaced. It costs like $400, luckily mine was covered by an extended warranty. If you do not have access to a multimeter, you can test it another way. You need to take the entire door panel off! It's really not as bad as it sounds. If you need help with it, get back to me for directions
Posted on Jan 18, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 16, 2016 | 2006 Buick Rendezvous
Jun 11, 2015 | Buick Cars & Trucks
Sep 24, 2013 | 2003 Buick Rendezvous
Jun 27, 2010 | 2005 Buick Rendezvous
May 25, 2010 | 2002 Buick Rendezvous
Dec 23, 2009 | 2002 Chevrolet Silverado 2500HD
Oct 08, 2009 | 2003 Buick Rendezvous
Feb 26, 2009 | 2003 Buick Rendezvous
123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: