Re: My running lights/dash lights are not working on a...
I looked in a Haynes manual and it showed a 20 amp fuse controlling the the dash/ taillights. I t sould be in the fuse block under the the driver's side dash. If you have your owners manual, there should be a fuse locator diagrahm to help you locate the right 20 amp fuse. Remember usually when your dash lights are out so are your tail lights.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
where is the relay under the hood of the geo becuase i have the same issue but i changed the relay on the break pedal and i can here it clicking on but still no running lights at all nothing so if there is a relay under the hood can you please tell me were it is thanks emial me at email@example.com asap thanks!
Check all the bulbs at tail end for parking and brakes, test grounds and harness for trailer. Check fuses. clean batery terminals, Re instal head light swich properly and make sure all wires conect.
There is a circuit breaker inside the headlight switch body. It gets weak over time and use. The breaker is actually mentioned in the owners manual. A new switch is about $75.00 at the local parts store. You must remove the front of the dash to change the switch. Mine would go off and then in about 30 seconds reset and the lights would come back on. I would be driving down the road with my headlights flashing as the circuit breaker opened and closed. New switch = problem fixed.
Ignition switch will cause you to loose your head lights and turn signals. You will still be able to start the car and hold the switch for your brights but normal function is gone. Check it out it usually only runs about $20-$30 for replacement part but you need a special puller to get to it.