Question about Chevrolet Silverado 1500

1 Answer

When you push the 4 wheel drive button it goes right in 4 wheel drive but when you push the 2 wheel drive button it won't go back into 2 wheel drive but you can switch it to 4 wheel automatic and push the 2 wheel drive button several times the indicator lights go off then it sometimes goes back into 2 wheel drive, has a humming noise under truck when you push button.

Posted by on

  • 2 more comments 
  • CW4 915 Mar 04, 2009

    4WD Low light continually On

  • Anonymous Mar 18, 2014

    04 sierra push button lights on but when i try to change into 4 wheel nothing happens and indicator light stays solid and i already changed the push buttons so thats not the problem does anyone have any idea what the problem is

  • Anonymous Mar 27, 2014

    driving on freeway going straight drives fine then when i go up hill sum it seems to slow down and when i push on gas it takes time to go

  • Anonymous Mar 29, 2014

    when in 4 wheel drive, it gets in a bind, then when i switch it to 2 wheel drive, it frees itself

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

A lot of 4wd you have to back up for a few feet to disengage the hubs after you tourn them back to 2wd

Posted on Dec 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4 wheel drive is stuck on


Try going to 2WD while in neutral. Then take it to the shop to check it out.

Jan 18, 2013 | 1999 Chevrolet Blazer

1 Answer

1999suburban won't switchfrom 4 wheel to 2 wheel drive when pushing auto dash buttons


Try it while backing a straight line. This was how the old manual hubs released. The autolock hubs may be worn just enough to hang up and not relaease as they should. Backing up will give that extra nudge.

Jan 29, 2012 | Cars & Trucks

1 Answer

4 wheel drive doesn't work


sounds like the shift motor on the transfer case is going bad.

Aug 29, 2009 | 2004 Chevrolet S-10

3 Answers

My truck is stuck in 4 lo


pull atc 25 amp fuse in underhood fuse center and 10 amp 4wd fuse inside cars fuse box,your problem is in control box behind kick panel on pass. side ,corrosion build up,

Mar 06, 2009 | 2000 Chevrolet Blazer

2 Answers

Front drive, 4 Wheel drive won't engage


that vacume line goes back to the transfer case, the end that goes behind the motor hooks to a steel tube so it does not get hot from the exhaust., my guess it should be hooked up so it will feed vacume to the vacume ball so it can lock in the axels. if you start the car and shift into 4 wheel drive and listen under hood you should hear a hissing sound, that is vacume, if you can't hear it there, you may have to craw under the right side to hear it, probably came unhooked underneith the car

Feb 01, 2009 | 1995 GMC Jimmy

1 Answer

2004 Suburban 4 wheel drive


set as default most likely either that or computer error. please email me at meanness628@aim.com with any other info or questions

Sep 29, 2008 | 2004 Chevrolet Suburban

1 Answer

Four wheel drive engages from 2 hi to 4 hi on its own whe driving


I had this problem also, disconnect the battery a leave it for a while, this reset it,
only draw back somtimes it will reset idle also and vehicle will stall, to fix this just let it sit idling
for a bit and it will relearn the settings

Sep 29, 2008 | 2001 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...