Question about Dodge Caravan

1 Answer

My check engine light came on and it sputters and chugs when I try to excellerate. I tried pressing and holding the "trip" button with the key on. Then I turned it off. It said "sof 4.0" then "E code" then "200.00" then E end. Then it cycled through all the dash lights.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Catalytic converter stopping up maybe

Posted on Dec 13, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i turn engine managment light off plz on a volvo c70

  • 1

    Place the key in the ignition and move the key to Position I.

  • 2

    While keeping the key at Position 1, press and hold the reset button for the trip odometer. You will find that button located where the speedometer is.

  • 3

    While still holding the button for the trip odometer, move the key to Position II.

  • 4

    At this point, wait until the service light is flashing, it should take about 5 seconds for this to occur. When it hits its 3rd or 4th flash, move the key back to Position I.

  • 5

    Release the button for the trip odometer. Next, start the car and you will notice the service light should be reset. If not, try it again. It may take more than one time to get this light reset. Good Luck!

  • Mar 12, 2011 | Volvo C70 Cars & Trucks



    THIS IS HOW YOU RESET THE CHECK ENGINE LIGHT ON THE 99 HONDA ACCORD. 1. With the Car Off, Press and hold down the Odometer Trip Reset Button. 2. While still pressing the Trip Reset Button, Turn the Ignition Key half way on where all your oil, check engine lights etc.. turn on. Don't turn it as far as you would to normally start the car. Wait a few seconds and the Check engine light will turn off. 3. Turn the key back to the Off position and you're done. What a scam Honda has with the BS Check Engine Light.

    on Dec 07, 2009 | Honda Accord Cars & Trucks

    1 Answer

    I changed oil on my 2006 Tacoma pick up, how do I turn off my maint light. Tks John

    Try this procedure.

    1. Turn the ignition key up one notch. (The dash lights will not be on)

    2. Press and hold down the Trip Meter Button next to the odometer.

    3. While continuing to press down on the Trip Meter Button turn the ignition key to the next notch or the "Run" position, the dash lights will come on but do not start the engine.

    4. Continue to press down on the Trip Meter Button until the Maintenance Required light turns off.

    The Maintenance Required light should now be reset.

    Nov 06, 2010 | 2006 Toyota Tacoma

    3 Answers

    2005 lexu 330, turn off maintenance light

    1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car.
    2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting).
    3. Turn the key to OFF.
    4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to "On".
    5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds.

    page 77 of the 2004 Lexus rx330 handbook...
    (you will find the answer you are looking for in resetting your maintenance light.)
    with the odometer reading visible, (not trip A or trip B..) turn off engine.

    While keeping Odo/trip button depressed, turn ignition back on (not starting the engine) You will see dashes (instead of numbers) on your odometer disappearing one at a time. it will be replaced by 0's (zeros).. Release the Odo/trip button and your original mileage will come up....
    And your done..... until the next oil change.

    Thank you for using fixya and good luck

    Oct 10, 2010 | 2005 Lexus ES330

    1 Answer

    Service light is on .

    you need to reset it.
    try this ; key on , engine off , if you have trip meter button rapidly press it until odometer displays.
    turn key off , press and hold trip meter at the same time put the key on , if you see the bar , wait till it finish reseting(10-15 sec).
    if you have reset button do the same with reset button.

    Apr 29, 2010 | 2007 Lexus IS 250

    6 Answers


    I finally found the solution. It is actually detailed in the owner's manual but you really have to hunt for it. Look at page 450/451.

    Step 1: Switch the display to the trip meter A with the engine running.

    Step 2: Turn the engine off (but don't turn the key all the way to where you can remove it from the ignition).

    Step 3: While pressing the trip meter reset button, turn the key to IGNITION ON (but don't start the engine). Continue to press and hold the trip meter reset button until the trip meter displays "000000".

    Jan 20, 2010 | 2009 Toyota Venza

    3 Answers

    I have a 2008 corolla. It has an auto light when the car needs an oil change. I need to know how to reset it.

    Look in your owners manual and go to the part that explains the different symbols on your dash. Look for that service reminder and it should tell you what page to go to to learn more about that. Somewhere there should be some wording to the effect that "When you have your car serviced by a certified Toyota dealer they will reset it for you. In the event that someone other does your maintenance then this is the procedure to reset......."

    Oct 04, 2009 | 1998 Toyota Corolla

    1 Answer

    How do trun off my check engine ligth on a 1995 honda accord lx

    1. With the Car Off, Press and hold down the Odometer Trip Reset Button.
    2. While still pressing the Trip Reset Button, Turn the Ignition Key half way on where all your oil, check engine lights etc.. turn on. Don't turn it as far as you would to normally start the car. Wait a few seconds and the Check engine light will turn off.
    3. Turn the key back to the Off position and you're done.

    Jul 15, 2009 | 1995 Honda Accord

    1 Answer

    How do i reset my kilometer gauge after changing oil or does it reset to 0 automaticly

    Resetting Oil Service Light on your 2002 - 2006 MINI Cooper and Cooper S, and 2007 - 2008 MINI Convertibles:

    1) Press and hold the trip button
    2) Insert key and turn to position 1
    3) Watch for RESET to appear
    4) Release the button, then press & hold it again
    5) Wait for the RESET to flash
    6) Release the button, and then press & release (once only)
    7) Service interval should then be reset to next interval
    If that didn't work, try this:
    1. Push the Trip Button
    2. Turn ignition key to position 1 and 51A will appear to left of mileage
    3. Release trip button
    4. Wait 3 seconds
    5. Push trip button
    6. Wait (5-8 seconds) for RST to appear in left corner
    7. Release trip button
    8. Push trip button
    9. 15000 will appear as new service interval
    10. Release trip button

    Or this:
    1. Press and hold the trip odometer button.
    2. Insert car key and turn it to the fi rst position (not the second position).
    3. You will see 51A come up in the trip odometer area.
    4. Release, then press and hold again.
    5. Watch for the word “RST” to appear on the Odometer indicator.
    6. Release, then press and hold again.
    7. Wait for the “RST” message to fl ash.
    8. Release, and then press & release (once only).

    Apr 12, 2009 | 2003 Mini Cooper

    2 Answers

    How do I turn off the change oil light on a 1994 corvette

    1. Turn the key to “Run,” but don’t start
    2. Press “ENG MET” on the Trip
    the engine.
    Monitor. Then, within five seconds,
    press it again.
    3. Within five seconds, press and hold
    “GAUGES” on the Trip Monitor. The
    “CHANGE OIL” light should flash.
    4. Hold the “GAUGES” button until the
    “CHANGE OIL” light stops flashing
    and goes out. This should take about
    ten seconds.
    When the light goes out, the monitoirs
    reset. If the monitor doesn’tr eset, turn the
    ignition off, then try again.

    Nov 18, 2008 | 1994 Chevrolet Corvette

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    409 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts


    Level 3 Expert

    78267 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides