Question about 2002 GMC Envoy

2 Answers

How do I remove the headlight cover to replace the bulb on a 2002 GMC Envoy

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open your hood and there are 2 clips on the top of the headlight assembly. Pull up on both of them and the headlight assesbly can be pulled out. You will then simply need to twist and remove the old bulbs from the housing.

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Cover should not be removed. should do it from the back. twist and remove

Posted on Dec 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change 04 envoy bulb


Headlight Replacement (Envoy)

Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Jun 18, 2012 | 2004 GMC Envoy

1 Answer

Need to change headlight bulb in gmc envoy 2003


Drivers side- stick your hand behind the headlight and remove the rubber cover, and twist out the light.

Passenger side- remove the air cleaner top, and move the air cleaner out of the way. You now have complete access to this side to remove the rubber boot covering the bulb.

Dec 22, 2010 | 2003 GMC Envoy

2 Answers

How to install a headlight bulb


There are two retaining tabs on the back side of the headlight. One on each side. You must pull up an the tabs, then the whole assembly will come out. Then twist the bulb socket out.

Dec 21, 2010 | 2004 GMC Envoy

1 Answer

How do you get to the front headlamp to replace burned out bulb on 2002 envoy


On top of each of the headlight assemblies you will see two L shaped handles, pull each one straight up. This will release the assembly and you can move it out a small amount. Access to the bulbs is behind two rubber caps, the top one is for low beam and bottom one for high beam. Bulbs unlock with a quarter turn CCW.

Sep 24, 2010 | 2002 GMC Envoy

1 Answer

Replacing the low beam headlight on a 2004 gmc envoy


Just above the headlight assembly are two angled tabs, pull these straight up (they may need some effort). These will release the assembly, carefully pull the entire assembly forward. Access to the headlight bulb is behind the two rubber caps, the upper cap is for the low beam. Remove this cap, twist the headlight bulb socket CCW and remove. Disconnect bulb from harness by prying up gently on locking tab on socket, and pull bulb out. Being careful not to touch the new bulb glass surface with your finger, plug it into the socket and install it back into the headlight assembly turning it CW. Reinstall rubber cap, seat headlight assembly on frame, lining up the bottom and top pegs. Once the assembly is fully seated, push the two angled tabs down, locking the assembly in place.

Oct 15, 2009 | 2004 GMC Envoy

2 Answers

How to replace the headlights on my 2003 GMC envoy.


no the battery does not have to come out the grill in front must be removed .yhis grill runs through the headlight lens there ore 2 sqaure clips that hold the lens pull up on them slid out lens and get to the bulb should be 9007 bulb number.

Jan 30, 2009 | 1999 GMC Jimmy

1 Answer

How do remove the cover from the headlamp bulb 2003 envoy


open the hood.
there are 2 small steel "tabs" which you need to pull straight up.
once these are in the up position, pull headlight assembly forward.
remove plug connector to headlight, prying the wiring tab with a screwdriver.
rubber cover can be pulled off exposing the back of the headlamp bulb.

Jan 13, 2009 | 2004 GMC Envoy

2 Answers

2005 GMC Envoy passanger headlight


I have had the same problem on both Headlights at different times on my 2002 Envoy. I had to replace bulb sockets. Sockets with pigtail can be purchased at most auto parts stores. Make sure to put conductive lube on terminals when reinstalling.

Nov 22, 2008 | 2005 GMC Envoy

2 Answers

How to replace the headlights on my 2003 GMC envoy.


The headlights on the envoy are the easiest parts of the car to repair. You just pull the two tabs at the top of the headlights, screw out the bulb containers and you are good to go

Nov 01, 2008 | 2003 GMC Envoy

1 Answer

Replace headlight


It is quick and extremely easy to replace the headlights on the envoys. Look at the top of the headlight assembly. you will see a kinda large lever you can pull up. Pull it up and the entire headlight assembly will be released from the car. Be prepared to hold it, and whatever you do, do not touch the new bulb with your bear hands!!. Kinda self explanitary once you get the bracket loose by pulling up the lever. Replace the bulb, and put the assembly back in the same way,, and press back down on the lever. Your done,, takes about 2 to 3 minutes.

Jul 18, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...