Question about 2000 Toyota Tacoma PreRunner

1 Answer

Starter best way to remove starter on 2000 toyota prerunner

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 42 Answers

Assuming it is v/6 if my memory serves me correctly you have to remove the r/f wheel and remove it through the wheelwell. You will have to remove the transmission dipstick and tube held by a 12mm bolt on side of head (if A.T.M.) there are one or two bolts holding the brakeline to the frame, remove the bolts so you can move the lines out of the way, they are pretty flexible to move, just don't crush or kink. not gonna lie, the job is a bit of a pain, but is doable. good luck.

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me the color of the battery and starter wires on a 2000 toyota tacoma?


mines black. why worry color.?
my other car has new cables ones black (minus) and other red, Plus.
on many cars the schematics show , NCA,. no color assigned.
that way the factory can use many brands.
if really curious.....????
read the FSM
or login to alldata.com. like us.

Jan 02, 2014 | 2000 Toyota Tacoma PreRunner

1 Answer

Have 2000 toyota prerunner. have power to starter with key off. with key in on position no power at starter.


Replace the entire switch, not just the tumblers. Before installing the new switch take it to a locksmith along with your old switch key and have the new lock keyed to work with your old key. This will save you from having a different key for the doors & switch.

Mar 16, 2011 | 2000 Toyota Tacoma PreRunner

2 Answers

2000 tacoma wo't start. Turn key nothing. Will rool off and start. New barttery


Could be your starter. If you turn it and it doesn't crank, should be the starter.

Jan 14, 2011 | 2000 Toyota Tacoma PreRunner

1 Answer

Location of the fuel filter on 2000 toyota tacoma 2 wd std cab


Oil filter on a 2000 Toyota Tacoma Prerunner with 6 cylinder IS a screw on filter located on the drivers side front of the engine (just beneath the alternator).

Can't recall the size but, you need a socket with extension to get to the bolts holding the skid pan then, wiggle/lift it from it's hooks. Then, you can either cuss, cuss, cuss while removing the old and installing the new OR, jack the drivers side up 4 to 6 inches ( gives you a bit more wiggle room and keeps you from scraping your elbow to the bone on whatever surface you're working on).

Even then, be ready for a good cussing bout because there still isn't much room.

May 19, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

I need to remove my 2000 Toyota Prerunner starter. How difficult will this be?


if its like the 4-runner or the tacoma its not very hard at all. its not too hard to get to so i think youll be ok i havent done one on this truck yet so im only guessing.

Mar 28, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

My 2000 toyota tacoma truck just won't turn on. My lights work, so I assume its not the battery or alternator..perhaps the spark plug or starter maybe the problem..it was running just fine yesterday..there...


So what does "turn on" mean?? either the engine turns over or it doesnt. If you hear 1 heavy click when you turn the key to crank, but it doesnt turn over, I would suspect you need starter contacts replaced, but only a starter/alt shop is going to repair it, most shops will only replace the starter. Sometime if yoiu just keep trying it will turn over. But dont let it go, get it fixed ASAP.

Mar 18, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

Location of fuel filter 2000 prerunner 2.7 engine


In the engine bay, on the firewall, behind the engine if it's a 2.7L I4. It'll be tricky to change due to space constraints.

Oct 29, 2009 | 2000 Toyota Tacoma PreRunner

1 Answer

Replace starter


Disconnect the battery, then crawl under the truck and locate the starter, remove the plug going to the solenoid (small brown lead w plastic clip) . then the power wire that goes from the battery to the main starter terminal (12 mm nut) locate the 2 starter bolts 14 mm and unbolt the starter and remove. install in reverse order. ON the 4 wheel drives you may need to remove the skid plates over the bottom of the engine to access the starter.

Jun 22, 2009 | 1999 Toyota Tacoma PreRunner

1 Answer

Whats the easiest way to change the starter on a 1999 Toyota Tacoma?


Remove the driver side front wheel was the best way to gain access to the starter which is right there. After removing the bolts there was a lot of twisting to get it out.

Have a great day!

Jun 18, 2009 | 1999 Toyota Tacoma PreRunner

Not finding what you are looking for?
2000 Toyota Tacoma PreRunner Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...