Question about Jeep Wrangler

1 Answer

My 94 jeep wrangler with a 4.0l will not start but it will turn over?

Posted by on

  • 3 more comments 
  • m_oharod Dec 12, 2008

    yes fuel pump was changed about two years ago. the cap looks good and the button looks good to

  • m_oharod Dec 12, 2008

    yes fuel pump was changed about two years ago. the cap looks good and the button looks good to

  • spoon1986 Dec 16, 2008

    i have a 95 jeep wrangler with a 2.5L and and have changed everthing know to man on this jeep but the compture. I cant figure this one out on my own it just stoped runing one day. I have cleaned the compture all the hook ups. Still no luck please someone help!!!!!!!

  • yadayada
    yadayada May 11, 2010

    DO NOT ASSUME ANYTHING, CHECK THE FUEL PRESSURE, TEST FOR SPARK AT THE SPARK PLUG.

  • yadayada
    yadayada May 11, 2010

    WHAT CRANK NO START DIAGNOSIS HAVE U DONE, CHECKED FUEL PRESSURE?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

If you have fuel pressure but no spark it could be the crank shaft posisition sensor

Posted on Dec 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 wrangler engine miss


If your check engine light does not come on, in the dash, when you turn on the ignition, then your ecu needs to be repaired. Search on this site for delayed start check engine light problem.

Mar 05, 2013 | 1994 Jeep Wrangler

1 Answer

1994 jeep wrangler map sensor location on motor


I have a 94 jeep wranger just started to idle at 3000-3500 rps checked the tps and tbi no change but remove the vacuum line to map sensor idle lowers 2000 but runs rough

Jan 31, 2013 | 1994 Jeep Wrangler

1 Answer

94 wrangler 4.0 fuel pump wont turn on


If your check engine light does not illuminate when you turn the ignition on then your jeep ecu is in need of repair. The check engine light has to be on for the fuel pump to get power. Try leaving the ignition key in the on position for a few minutes to see if the check engine light does eventually come on and if the fuel pump starts to work then.

Jun 15, 2011 | 1994 Jeep Wrangler

2 Answers

95 Jeep Wrangler. When select 4wd lo or high,


there is a vacumn shift motor on your front passenger side axle. these are notorious for problems. check it to make sure it is working.

Feb 03, 2010 | 1992 Jeep Wrangler

1 Answer

94 jeep yj 4.0l starts in gear


It should have a safety interlock switch on the clutch to prevent it from cranking with the clutch not depressed. Do a search on the Internet for 94 jeep clutch pedal safety switch. If its an automatic it should have a switch on the transmission linkage to prevent starts out of park.

Feb 01, 2010 | 1994 Jeep Wrangler

1 Answer

Hard to turn key in 94 jeep wrangler when cold outside


the grees in the lock is getting stiff give it a splosh of WD40 do it to all of them and they will fix them self's

Jan 09, 2010 | 1994 Jeep Wrangler

3 Answers

Looking for Service Repair Manual Jeep Wrangler YJ


i have a 1988 jeep wrangler 6cyl with 5 speed transmission. I was shifting the jeep and it got stuck in third gear. We opened it up and saw that the linkage is aligned and everything is in place. I dont know what is wrong and what to do next. please help ....

Jul 10, 2009 | 1992 Jeep Wrangler

2 Answers

94 jeep wrangler. Replaced fuel pump relay, fuel pump, cap, rotor


i was having the same problem with my 95 jeep rio grande. i replaced , rotor and cap, sparkplug wires, sparkplugs, pick up plate, ignition coil. come to find out my ecu/ecm was bad . i replaced it and i havent had a problem since.

Jun 05, 2009 | 1995 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...