Question about 2007 Chevrolet Silverado Classic SS New Cars

2 Answers

Brake lights do not work, all other lights work.

My brake lights on my 96 Blazer 4X are not working, but all the rest of the lights work. Fuses seem to be okay. When tested, there is power going to and out of the fuses, but no brake lights. I have a 2007 Chevy Silverado. My rear brake lights don't work, but my top (third ) brake light does. I have checked all the fuses, and replaced the bulbs.

Posted by on

  • 1 more comment 
  • solieswrench May 11, 2010

    I think on that model the turn signals and brakes are the same bulb. So check your turn signals. Maybe a turn signal switch problem. 

  • Anonymous Mar 18, 2014

    brakes working but lights brake lights and the brake light strip at top of boat wont light up checked all fuses

  • Anonymous Mar 28, 2014

    The top brake light works. I cannot find a fuse for them. is there one?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

Have you checked the brake light switch thats activated by the brake pedal arm?if not follow the brake pedal arm up under the dash and you will find a switch that goes on and off when you push the arm in and out.Make sure you have power in and out and the switch is correctly adjusted.

Posted on Dec 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

It is a common chevy problem for the circuit board that holds to bulb to fail, are your running lights and signals still working back there as well? If not then you need to replace the boards.

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 Blazer, tail ang turn lights work, Braking blows the fuse. unplug over head and see short on white wire to brake light. Paul


White brake wire to trailer connector was coupled to white Gnd wire at trailer connector splice.

Jan 04, 2010 | 1996 Chevrolet Blazer

1 Answer

What do the relays and fuses look like under the hook of a 96 s 10 blazer. Someone said to check theses and how do you. My brake lights dont work and the 10A fuse under the dash is good and i replaced the...


Did you check or replace the brake light bulbs?
It is more common to have burnt bulbs than a bad brake light switch or blown fuse.
Do you have orange signal lights and red brake lights at the rear?
Then the signal light switch will not affect the brake lights.....but....
If they are all red and you use the same bulbs for brake and signal....the brake light wiring goes through the signal light switch and could be affected there.
First....check for power getting to the brake light switch......and leaving it with a test light.......then go to the rear....pull a light assembly and check for power getting to the bulbs.no power? follow the wiring back to the switch looking for a bad connection.
The fuses and relays under the hood are usually in a black plastic box labeled fuses and or relays.

Aug 12, 2009 | 1992 Chevrolet S-10

1 Answer

1996 Silverado. All 3 brake lights don't work. Flashers do.


i would check it,seems u have an open circuit,switch not working,broken wire or corroded elect.connector.

Mar 13, 2009 | 1996 Chevrolet Blazer

2 Answers

Brake lights do not work, all other lights work.


My fiancee' followed Ron's instruction, on where to find the brake light switch, and was finally able to locate it, get it out, and replace it with a new one. I now have brake lights. He had been looking all morning for the switch but could not find it, and he is an ace mechanic, so thanks to Ron for his expert advice. You guys are the greatest!!

lonerose

Aug 18, 2008 | 1996 Chevrolet Blazer

1 Answer

Turn signal cuts out when brake is applied


To cover all of the bases, replace your bulbs, fuses and flasher.

Jul 24, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
2007 Chevrolet Silverado Classic SS New Cars Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...