Question about 1998 Toyota Camry

1 Answer

98 camry windshield wiper

My windshield wiper intermittent setting does not work on a 98 toyota camry. The wiper works fine but the intermittent setting will not work. Any suggestion? Thanks

Posted by on

  • jwall11 Dec 12, 2008

    Thanks, the wiper does not return to the park position.

  • Toyota Ed May 11, 2010

    90% of the time, we replace the wiper motor. But, that is predicated by the fact that the wiper motors ALSO does not return to the Park position. If you need more info/testing proceedures, please respond.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

You will have to change the swich that control the wiper blades cause sometimes they go bad

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front windshield wipers will only work on high. Any suggestions?


Search Results

    My windshield wipers only work on high speed...? ' Yahoo Answers

    https://answers.yahoo.com/question/index?qid...
    Nov 11, 2006 - My windshield wipers only work on high speed. ... If it's the compound switch on the lever on the steering wheel, it can be a bit complicated to ...

    Windshield wipers - CarGurus

    www.cargurus.com > Questions > Mercury > Grand Marquis

    CarGurusMay 19, 2015 - Windshield wipers - My wipers stopped last week and the next day they ... slow or intermitt and only work on high speed and the washer wiper doesn;twork ... The LCM does not effect the operation of the motor or switch it just ...

    Windshield Wipers only working at highest setting - Ford Flex Forum

    www.fordflex.net > ... > General Ford Flex Discussions
    Feb 16, 2011 - Windshield Wipers only working at highest setting ... rear wiper worksjust fine, just the front wipers only work at highest setting. ... the wipers sometimes grinds out the gears thus only working at high sppeds. If it is the motor or Transmission for the wipers, can I fix this myself and how much would it cost me.

    Common GM Wiper Problem - YouTube

    ? 3:23
    https://www.youtube.com/watch?v=kc6e2Tmar68
    Oct 25, 2010 - Uploaded by roadragecustoms
    The windshield wipers only worked occasionally. ... My 1998 dodge ram wipers only work on high will this help me? thanks.... Express van. you have to take out the motor and the transmission from under the front of the van..

Feb 09, 2016 | Cars & Trucks

2 Answers

2000 toyota camry windshield wipers won't work


First I would look in the fuse box by the driver side and check the fuse,if good then get a meter and see if power is going to wiper motor,if so,then wiper motor is bad,if no power is going to motor,then bad switch,here's a link to see. Repair Guides Windshield Wipers And Washers Windshield Wiper Motor...

Windshield Wiper Switch

Print
REMOVAL & INSTALLATION
The windshield wiper/washer switch is part of the Combination Switch Assembly. Refer to Turn Signal/Combination Switch services procedures.

Oct 18, 2014 | 2000 Toyota Camry

1 Answer

2009 toyota corolla/ windshield wipers stop working on intermittent setting. have to push on blades to start moving again. is it relay, motor, switch?


hi there . think they may need a bit of wd40. spraying on the shaft.
probably just road dust and debris. making it stick.

Mar 01, 2014 | 2009 Toyota Corolla

2 Answers

Windshield wipers work but interminent settings don't


most likely cause is the wiper switch has gone bad and unable to 'time' the intermittent speeds.the intermittent speeds work on a resistor type system where low and high speeds add direct voltage.

Jul 30, 2011 | 2000 Toyota Avalon

1 Answer

Windshield wipers work on "high"


Don't really know of the vehicle, but what I am use to is that this could be the switch Since the wipers do work that rules out the motor. But, there could be a fuse or relay that controls that part of the system?

Jan 19, 2011 | 1996 Toyota Camry

1 Answer

2002 Toyota Avalon intermittent setting on wipers not working. In that setting the wipers stay on continuosly and when setting the wipers to the off setting they stay where ever the blades are at the time...


The problem is a broken part in the module which is inside the wiper motor. As far as I know, the part is not available, and you must replace the entire wiper motor to repair the problem

Dec 13, 2010 | 2002 Toyota Avalon

1 Answer

1998 Toyota Camry wipers don't park and only work on low & hi.


Really from experience I will advice you have the wiper motor replaced.

Rate this solution.

Dec 30, 2009 | 2000 Toyota Camry

1 Answer

S-10 Wipers Don't Work in the rain


My 98 suburban did the same thing (has intermittent wipers I assume) I had to replace the wiper motor. AutoZone had a rebuilt one for $50. ($279 at dealer for a new one)

Jul 28, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Driver's side wiper froze and broke on PT Cruiser.


There is likely something in the linkage between the wiper and the motor that is broken.

Jan 01, 2009 | 2006 Toyota Camry

1 Answer

Wiper problem


Toyota Ed is right. He should get credit, but this questions needs to go away, sorry Toyota ed.

Oct 16, 2008 | 2000 Toyota Avalon

Not finding what you are looking for?
1998 Toyota Camry Logo

1,412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...