Question about 1997 Chevrolet Venture
There are many things that can cause a vehicle to not start.
1. No spark to spark plugs
2. No fuel injector function
3. Low / no fuel pressure.
And there are many things that can cause a loss of either one of these things. A bad fuel injector would not cause this.
Posted on Dec 13, 2008
what motor,and what problem are you having,the inj system covers alot of area,is the check engine light on ,will the car run,is there spark
Posted on Feb 19, 2010
look under it on the frame rails, the filter it held to the frame about middle of van ,just follow the fuel lines from tank ,easy to change , ,hope this helps you, thanks robert b.
Posted on Jul 08, 2009
You will need to remove the fuel rail, pull the injector out and put new one in. Only thing you need to remember is that you have to pay attention to "o" ring seal, making sure you remove the old one and not damage the new one. There are specific instructions for removal in any inexpensive manual.
Posted on Mar 19, 2009
Removal & Installation
NOTE Each injector is calibrated. When replacing the fuel injectors, be sure to replace it with the correct injector.
Fig. Exploded view of the fuel meter assembly, including the injectors
CAUTION To reduce the risk of fire or injury ensure that the poppet nozzles are properly seated and locked in their casting sockets.
Posted on Jan 20, 2010
Tips for a great answer:
Jul 24, 2016 | 1999 Chevrolet Venture
Jun 07, 2015 | 2002 Chevrolet Venture
Feb 02, 2013 | Cars & Trucks
Feb 12, 2011 | Chevrolet Venture Cars & Trucks
Dec 06, 2010 | 1999 Chevrolet Venture
Nov 06, 2009 | 1999 Chevrolet Venture
Jul 08, 2009 | 1999 Chevrolet Venture
Jun 06, 2009 | 1998 Mazda 626
Mar 19, 2009 | 2000 Chevrolet Venture
368 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: