Question about 2007 Mercedes-Benz C-Class

1 Answer

Fog lamp bulbs

Hey, i have a mercedes c class 2005 w203 model, i would like to know what bulb size fits in it, is it a hb3 or hb4.. many thanks

Posted by on

  • Anonymous Mar 30, 2014

    my car is 2001 model esp triangle comes on at odd times

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Remove the old bulb and the part # is on the bulb
rank me vote me

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How hard is it to change a fog light bulb on a 2005 Subaru Forester? Can anyone do it?


Front Fog Light Assembly

REMOVAL


  1. Disconnect the ground cable from battery.
105919447



  1. Remove the two clips and lower mudguard on side that bulb is being changed.
  2. Disconnect the harness connector from bulb on back of fog lamp.
105919448




Front Fog Light Bulb

REMOVAL


1. Locate back cover on fog lamp assembly where bulb is located inside.

105919462



  1. Remove the back cover.
105919463



  1. Remove the spring retainer, and then detach the fog light bulb.
  2. DO NOT TOUCH HALOGEN BULB!! Oils from skin will cause bulb to explode during operation.

Jul 27, 2011 | Subaru Forester Cars & Trucks

2 Answers

How do you replace a fog light bulb on a 2005 hyundai tuscon"?


undo the hatch back {life the tail up as if you were wanting to gain access to the boot ..you will notice on either side both lighting clusters .depending on what side needs replacing .all you have to do it use a size 2 Philips screw driver to remove the black screws holding in the lighting clusters the locate the broken lamp{bulb} then twist the holder half a turn then replace the lamp {bulb} and then refit the cluster ..PLEASE note when you remove the screws you will have to gently ease the lighting cluster away from the body of the vehicle as if you try to rip it of you will damage it .there are two lugs that slide in to the bodywork of the car .make sure that you take a little time to locate them and check that the lighting cluster fits nicely to the vehicle before you replace the screws ..its worth trying the replacement lamp/bulb before you replace the screws ..just in case you have replaced a fault one with a faulty one !!! it can happen .

Jan 04, 2011 | 2005 Hyundai Tucson

1 Answer

Describe how to change fog lamp (just the bulb) on 2005 subaru forester. As far as I know the fog light assembly is fine, the bulb has just burned out. If you know which bulb to use please let me know,...


2005 Forester - It is easiest to remove the fog assembly.

1. From underneath the vehicle pry out one plastic fastener to be able to bend the light weight plastic mud protector downward. You will see the underside of the fog light assembly with one 10mm bolt directly above you. Remove this bolt.
2. From the front of the vehicle unscrew one 10mm bolt at top of fog light (this is the shorter of the 2 by the way) and pry out one plastic rivet adjacent to it.

3. Carefully remove the fog assembly and disconnect 2-pin power connector by pulling up on the release. Carefully wiggle the housing out (no force req'd).
4. Unscrew the back from the housing and replace H3 bulbs. Take care not to touch the bulb while replacing.

5. Reverse to install.

Should take an hour at most.

Dec 15, 2009 | 2005 Subaru Forester

1 Answer

Hello i recently got a rear licance both the


lamp malfunction light is telling you your bulbs are blown. yoo probably need new batteries in your remote. use only mercedes bulbs!!1 parts store bulbs dont work in a benz..

Dec 12, 2009 | 2005 Mercedes-Benz E-Class

1 Answer

Front driver side fog light out


sounds like poor electrical contact around the bulb holder, or in the electrical plug to the foglamp unit. surface corosion to the terminals. try cleaning these contact surfaces with some emery tape or a very small screwdriver. you may also find bending the contacts very slightly in a way that makes them press harder against the bulb helps. if you have access to a test lamp check for a live feed to the contacts as well.

Nov 09, 2009 | 1999 Mercedes-Benz E-Class

1 Answer

What size bulb is an audi s4 headlight and fog light?


SYLVANIA H7 SILVERSTAR HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- 55 Watts, Single C-8 filament for use as either high beam or low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light colour similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements. Fits Driver or Passenger Side Driver or Passenger Side Fits the following vehicle/s
2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L RAMPAGE FOG LIGHT, BLACK METAL HOUSING, With round clear lens; Includes 100-Watt H3 halogen bulb, one lamp and a single bolt mounting system; Provides better illumination Fog Light

  • Fits the following vehicle/s: 2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L;

Jun 24, 2009 | 2004 Audi S4

1 Answer

How do you replace the fog light bulbs on a 2004 buick regal?


Notes FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE
f98bf40.gif
  1. Remove the front bumper fascia deflector.
  2. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
01c84b0.gif
  1. Rotate the front fog lamp bulb/socket counterclockwise to release.
  2. Remove the fog lamp bulb/socket from the front fog lamp assembly.
4065803.gif


  1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
b182709.gif
  1. Connect the electrical connector to the front fog lamp bulb/socket.
  2. Install the front bumper fascia deflector.

Jun 16, 2009 | Buick Regal Cars & Trucks

1 Answer

How to replace a fog lamp with replacement bulb only on 2002 toyota 4runner sport edition???? the three screws on the bottom?


Well, these are the steps and I will post the pic here in a second...looks like 2 screws...but like I said, you can see the picture for direction on this.


Remove or disconnect the following:

Front turn signal lamp
  • Connector
  • 2 screws
  • 2 claw fittings
  • Fog lamp assembly
  • Fog lamp bulb as shown
  • Fog light unit

  • To Install
    1. Install or connect the following:
      • Fog light unit
      • Fog lamp bulb as shown
      • Fog lamp assembly latch the 2 claw fittings and 2 screws
      • Connector
      • Front turn signal lamp
    Trying to post the pics now....

    May 14, 2009 | 2002 Toyota 4Runner

    1 Answer

    Mercedes C Class w203 side light bulb


    Hi rogergilliant,
    Joe here, The best way to remove the side light bulb is to go threw threw the inside. Have to remove the under front fender lining. There is a clip to remove the housing, but the best way to not damage anything is to go from underneath. 

    Apr 01, 2009 | 2007 Mercedes-Benz C-Class

    1 Answer

    Replacement Bulbs


    i believe on this car, low beams & fog lights use an HB4 and high beam uses an HB3. but, as bmw_tech_38 mentioned above, remove the old and it should be listed in the base.

    Jan 22, 2009 | 1998 BMW Z3 Roadster

    Not finding what you are looking for?
    2007 Mercedes-Benz C-Class Logo

    Related Topics:

    252 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercedes-Benz Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    yadayada
    yadayada

    Level 3 Expert

    60867 Answers

    Michael Contreras
    Michael Contreras

    Level 2 Expert

    164 Answers

    Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...