Question about 1997 Toyota Camry

1 Answer

1997 Camry Valve Cover Gasket Replacement

What are the steps involved in replacing the valve cover gaskets on a 1997 Toyota Camry V6?

Posted by on

  • 5 more comments 
  • davidmg0 Dec 15, 2008

    Thank you for the response. My gasket is leaking so I wanted to replace them and thought I'd do it myself. I did notice that the front cover was pretty straight forward, but the rear had a lot more stuff in the way. What are the steps involved with the removal of the rear cover? Is there anything else I should replace while I have the covers and intake removed?



    Thanks,



    Dave

  • Toyota Ed May 11, 2010

    Pulling the front valve cover off is quite easy. The rear cover, closest to the firewall is difficult. The best way to get the other cover off is to pull the intake plenum. Get back to me if you need more info.

  • Anonymous Mar 13, 2014

    VALVE GASKET REPLACEMENT INSTRUCTIONS

  • Anonymous Mar 16, 2014

    after replacing my valve cover gasket, i had a leek in one spot. should i attempt to re torque without reemoving the cover first?

  • Anonymous Mar 22, 2014

    Valve cover gasket

  • Anonymous Mar 24, 2014

    must i replace the conrod bolts when overhauling the enjine

  • Anonymous Mar 25, 2014

    2005 tacoma V6 need to replace valve cover gasket. Need help?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.

Posted on Dec 15, 2008

  • Shaun Tucker Jan 20, 2012

    ToyotaEd, I've been figting with this rear valve cover for a while now. My question is how do you get the wiring out of the way so that the valve cover can come off.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you re[lace a valve cover gasket


Hi , don't know your level of mechanical expertise but if your talking about th V6 engine it is a seriously involved job to undertake , i've included a link to a kia forum for more info and advice , keep me posted if you wish
valve cover gasket replacement Kia Forum

Jul 24, 2014 | 2003 Kia Sorento

1 Answer

I'm attempting to replace the valve cover gasket from a 1996 Toyota Carina (engine type E-AT211). Wiring, screws, plug wires, and plugs have all been removed; but, the valve cover is still attached solid....


TAP VALVE WITH RUBBER HAMMER OR TAKE A PIECE OF WOOD AND HAMMER.PLACE WOOD AGAINST VALVE COVER THE TAP WOOD WITH HAMMER VALVE COVER SHOULD LOOSEN UP.

Jan 03, 2011 | 1997 Toyota Camry

1 Answer

New Engine oil pours out from under valve cover...


Hello there. This issue will be the result of a warped vale cover, or a failed valve cover gasket. the more common culprit will most likely be a failed valve cover gasket. You may isolate the problem by removing the cover, and using a level to confirm the cover alignment. If it dose not line up correctly to the head, replace the valve cover. Now, if the cover is ok and not warped, simply, replace the failed valve cover gasket.

May 25, 2010 | 1997 Chrysler Cirrus

2 Answers

How do I replace my valve cover gaskets on my 1992 toy cam v6 3.0


this is relatively easy unbolt the cover from the head (this usually requires a 10 milimeter socket)once unbolted pull the cover off make sure you clean the old gasket off the cover and the head glue the gasket back to the cover and reverse the process used to take it off be careful not to over tighten the new gasket so as not to split it and cause it to leak.

Oct 03, 2009 | 1992 Toyota Camry V6

1 Answer

1997 toyota avalon oil pan gasket leaking , seems


Are you sure its the oil pan most leaks come from the valve cover gaskets up above. check the corners of the valve covers. If the pan needs re-sealed you will have to remove the flex pipe.

Jul 07, 2009 | 2002 Toyota Camry Solara

1 Answer

My toyota camry 1999 has oil leak and i replaced the valve cover


Replace the half round rubber gromets at the cylinder head ends just under the gasket you replaced

Mar 11, 2009 | 1999 Toyota Camry

1 Answer

Rear valve cover removal for 94 camry se v6


The best way to remove the rear valve cover is to remove the intake plenum. There is really no other way to do it. It is not a hard job, removing the intake plenum, but, trying to tackle the rear cover without taking off the plenum is almost impossible. If he does remove the plenum, make sure he replaces the plenum gasket. Hope this helps.
Thanks for choosing FixYa.

Dec 12, 2008 | 1995 Toyota Camry

Not finding what you are looking for?
1997 Toyota Camry Logo

1,621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...