Question about 2004 Chevrolet TrailBlazer

2 Answers

Ford Falcon 1995 Auto Problem

Hey,
A couple of months ago my parents gave me their old Ford Falcon 1995 model 4 Litre 6 cylinder. It was fine for the first month or so and then I noticed problems. First of all it randomly shift into neutral between 1st and 2nd gear and then randomly kick into 2nd gear causing my tyres to spin. (Its an automatic by the way) It gets really annoying, im guessing its a problem with the automatic transmission. Also it use to be fine going up hills, but now it even struggles on the slightest of hills, I can feel the problem on the accelerator where its sort of jolting. Kinda hard to explain really. Anyway, any ideas?

Thanks for your help

-Mike

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 95 falcon will not start when i turn the key to start motor I have no lights on dash and have tryed to jump start it does start but get about 100mtrs down the road and it dies?????

Posted on Jun 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

Have you checked the transmission fluid? if it is low can cause this. if not then it is an internal problem in transmission.

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 Ford Falcon XR6 4 litre inline 6. The motor started missing at low rpm and suddenly the was a sharp mechanical knocking sound and the motor cut out. When I try to restart it it battles and...


inline 6
xr6 is this a turbo"?
is car stock (original)?
the first is compression tests, at wide open throttle.
exact engine by whom not sure, but is this interference engine?>
chain, drive cams.
noise is never good, find it.
is this SOHC or DOHC, or tell exact motor name,
lets see if wiki does these cars.... its poor, cant even find real ford names for it.
for the BA-BF & FG XR6Turbo, ?

if this is a DOHC engine, say so first. as we never crank them
after noise, ever. we do a leak down tests. BY HAND.
if that fails , the valves are bent, and do not crank engine ever
until the bends are gone; "learn how to respect DOHC engines"

Jan 10, 2015 | Ford Cars & Trucks

1 Answer

DISTRIBUTOR LEADS CONECTED WRONG 2 IN WRONGPLEASE DO YOU HAVE DIAGRAMS 1999 FORD FALCON UTE PLEASE IGNORE MODEL DO NOT HAVE OUR LISTED


Web Site you can use click me
1- green
2- Red
3- Wht

Thats from left to right,

If its a 6 its the same on both coils
6 Cylinders

vp4cyl6wiring.jpg

4 Cylinders
vp4cyl4wiring.jpg

Mar 05, 2011 | Ford F Cars & Trucks

2 Answers

I NEED THE FIRING ORDER DIAGRAM FOR A 4.9 LITRE STRAIGHT 6


Cylinders are numbers 1-2-3-4-5-6 from front of vehicle to the firewall. And the firing order is 1-5-3-6-2-4.

Oct 02, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

How to adjust idle on ford falcon el 6 cylinder


wam the car up, disconnect the idle speed control valve wiring plug (idle control valve sits on top of the throttle body) then set the idle to 700rpm with the grub screw stop just above where the throttle cable fits to the throttle body. Reconnect theidle control valve and you're done. It may take a few k's driving for the ECU to relearn the new throttle stop position. The idle speed control valve is only used by the ECU to add idle speed when extra load is put onto the engine such as power steering or air con use, the base idle is set mechanically on the old falconns.

Oct 04, 2009 | 1983 Ford Fairmont

3 Answers

What is estimated average cost for timing belt replacement ?


should cost less than $100 at a FORD DEALER. mine cost $65 four years ago.

Apr 03, 2009 | 2000 Ford Explorer

1 Answer

1995 ford escort Clutch dosent work free wheels


has it been gradually getting worse or just all of a sudden? Also, do you see any liquid at the bellhousing of the trans? If so, you have leaking slave cylinder.

Aug 15, 2008 | 1998 Ford Escort

7 Answers

Firing order for a 1996 EF ford falcon


EF & EL are 1,5,3,6,2,4
EF has a coil pack under the inlet manifold the EL has a distributor
EF uses a waste spark system so 2 plugs are fired at the same time eg 1 & 6 - 2 & 5 - 3 & 4

May 18, 2008 | 1983 Ford Fairmont

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...