Question about 1994 Saturn Sc

1 Answer

Belt squeals 1994 saturn sc1.several belts put on the last belt was fine until a week later what's the problem and how much will it cost at saturn?

Posted by on

  • Frank Magliocca May 11, 2010

    WAS THE CAR EVER IN AN ACCIDENT,ANY BENT PULLEYS AND WHAT BRAND OF BELTS ARE YOU USING?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 341 Answers

A squeal alot of the time a bearing going bad on a part..... it can be from the alternator.... the belt tensioner.... the idler pulley..... the water pump...a/c compresser pulley.....you can go to autozone and ask them to look at it ...they might find the problem or at least narrow it down..... hope this helps

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai accent squealing very loud


You need to replace the belt.
Once a belt gets glazed it will slip no matter how tight it is.

Jan 17, 2013 | 2000 Hyundai Accent

1 Answer

From the minute i start my 1997 Saturn Sc1 it squeels from the belt area. When i surpass 55 mileas per hour it stops.


either the belts need adjusting or they are worn out...(if they havnt been replaced in the last 3 years i would replace...)

Sep 18, 2010 | 1997 Saturn SL

1 Answer

Serpentine belt on 96 saturn sc loose what could it be


Hello there:
Normally a serpentine belt will stay on tight untill it begins to strech out after it streches out to far the tention idler pulley cannot keep the belt tension tight any longer thus resulting in a belt either coming off or other things happening So what i would do is to first remove the serpentine belt and ensure that the tention idler pulley is working good make sure it does not just move freely than get a new belt and install now you should be ok
Hope this is very helpful for you
Best regards Michael

Dec 22, 2009 | 1993 Saturn SC1

1 Answer

2000 sc1 saturn not starting


yes, remove starter taka it to a service shop for servicing and checks , also check the condition of the battery,make shore it's holding charge and cells are ok.

Sep 27, 2009 | 1999 Saturn SL

1 Answer

Serpintine belt replacement


There is a pulley that appears to be not operating anything. This is an idler pulley, Attach a socket to the center of the pulley, when apply pressure it will turn releasing pressure on the belt, remove belt paying attention to the route. Replace belt as it came off. You will be fine.

Jul 05, 2009 | Saturn SC1 Cars & Trucks

1 Answer

I have a 1993 saturn sc and it has automatic seatbelts that go across you.. and the drivers side works fine but the passenger side will not work. it stays up and when i close the door it is supposed to...


It Needs Either a New Seat belt track assy. on the side that's not working or a new Seat Belt Control module Located under center console (Blk Box With 3 Connectors) One Fuse works both tracks

May 09, 2009 | 1993 Saturn SC1

1 Answer

Squealing fan belt.


New belts tend to stretch after a week or two.Simply retighten the belt now that it has settled in & it will be fine.Was it the alternator belt?That is the most common one to sqeal after replacement.Hope this helps you.

Mar 28, 2009 | Nissan Pickup Cars & Trucks

1 Answer

The main belt feel off my 93 saturn SC1


To put a serpentine belt back on your car, you should jack the right side up, and remove the tire first. Remove the plastic cover behind that to gain access to the side of the motor with the pulleys on it. On the side of the motor you will see down low the belt tensioner pulley witch swivels with the use of a wrench, i think it is a 14 or 15 mm wrench which is needed. Put the belt around all the other pulleys in the format they go by the picture under the hood, saving the last part of the belt to go the tensioner.Swivel the tensioner and but the belt over it, and put everything back on in reverse order.

Mar 25, 2009 | 1993 Saturn SC1

2 Answers

Serpentine belt keeps coming off my 1992 Chevy Cavalier


Hi Chris. I would check all the pulleys with the belt off and make sure the alternator, ac pump, power steering pump are all turning fairly easy and that the pulleys havent come loose and started wobbleing alittle.

Mar 15, 2009 | 1994 Chevrolet Cavalier

1 Answer

Serpentine belt keeps coming off 94 cavalier


chris....
ur problome will fixed if u change both the belt and the tensiner2e8f18d.gif

Mar 15, 2009 | 1994 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...