Question about 1998 Nissan Maxima

1 Answer

1998 maxima o2 sensor?

How many different sensors are there? I know ther are 3, but are any of them the same.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 705 Answers

Yes there are 3 O2 sensors on your car and yes there are all different. The one in the rear goes into the floor with a grommet inside of the vehicle under your seat with a different connector than the front O2 sensors and the front ones have different harnesses (longer and shorter). Hope that helps.

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know how many O2 wires in Nissan Maxima 03 sE


They have four wires, two for the signal and two for the heater circuit.

Sep 21, 2016 | 2003 Nissan Maxima

1 Answer

What wire from the engine harness grey or brown goes to the blue signal wire on the 02 sensor


posted now 3 times.
no engine stated (of the 3)
no symptoms stated. or job.
front or rear , oBD2 sensor not stated.
on your other post, i answred for all 3 engine
front 02 sensor B1S1.
all 3 engines, the ECU schematics on the 02 pins.

go back and read. your other posts.

Feb 28, 2016 | 1997 Geo Prizm

1 Answer

How many O2 censors in a 98 Maxima


In cars with EFI control there is a heated oxygen sensor(HO2S) before the cat converter and a ordinary oxygen sensor (O2S) after the cat convertor. so that means 1 of each on a 4 cylinder engine and 2 of each on a "V" engine . They are not interchangeable so a O2 sensor will not replace a HO2S sensor

Sep 04, 2014 | 1998 Nissan Maxima

1 Answer

2001 nissan maxima engine misfire


The Fuel Pump, I assume failed & was another issue

The Fuel filter is changed every 3 years, as preventative
maintenance

The Codes for the most part are O2 Sensors, that are over six
or seven years old & over 100,000 miles & should be replaced
as preventative maint or if they fail ,sooner

You don't throw out any what if senerios, or replace any parts
in an effort to resolve anything

You component test & replace only failed parts, related to the codes
& system that has a fault & drivability symptom

You should know if the spark plugs are over 3 years old

Clean the MAF Sensor & check for vacuum leaks on the entire car

Aug 01, 2012 | 2001 Nissan Maxima

1 Answer

Car back firing


plug wires crossed or o2 sensor going bad..have codes read at auto parts store for free to see if o2 sensor pops up

Jan 31, 2011 | 1998 Nissan Maxima

1 Answer

Where is the O2 sensor on a 1998 jetta k2. getting a "bank 1 sensor 1" code. Is there more than one sensor? Also, can a misfire in cylinder 3 cause the O2 sensor to malfunction?


this is the O2 sensor that is just off the engine in the exhaust and before the catalytic converter, sensor one bank one, u only have one bank of cylinder

Apr 28, 2010 | 1998 Volkswagen Jetta

1 Answer

1996 Nissan Maxima oxygen sensor


hye there ,,there are 3   o2 sensors on your car,,one for each bank,,,and the 3rd sensor is located after the cat this one usually goes first,,,,just make sure you no if your cars an import or not as they can be different,,,then you should be safe when ordering ,,hope that helps,,,

Apr 24, 2009 | 1996 Nissan Maxima

Not finding what you are looking for?
1998 Nissan Maxima Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...