Question about 2001 Chevrolet Blazer

1 Answer

Replacing headlight bulbs

How do i put new bulbs in the headlights?

Posted by on

  • cmmckee Dec 12, 2008

    it's a 2001 4 wheel drive automatic

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

Behind the core support you will find two flat retainers that you oull straight up this will release the whole assembly. After removing you can easily change the bulbs. Reinstalling can sometimes be tricky trying to realign the retainers. Please rate.

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace front HID light bulb? and where can I purchase parts for replacing?




  1. INSTALLATION GUIDE:


  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights


  3. Parts Identification:


  4. Projector Headlight


  5. Halo & L.E.D.


  6. Bottom of the Headlight:


  7. Ballast Bracket, Halo Wires(red/black)


  8. Turn Signal Adaptor


  9. TOOLS REQUIRE


  10. 10mm - 8mm socket


  11. Philip Screwdriver


  12. Crimper/Pliers


  13. For more information about how to install your vehicle, come visit our youtube page on


  14. http://www.youtube.com/spyderauto


  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.


  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.


  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.


  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.


  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.


  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.


  21. STEP:


  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.


  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.


  24. Factory Xenon Headlight


  25. Spyder Projector Headlight using Factory Xenon Lights






replace-front-hid-light-bulb-purchase-afy5cnsznmokzumyhdcbeseq-5-0.jpg

May 21, 2014 | BMW 335i Cars & Trucks

1 Answer

Headlights not working


The new headlights, probably blew the fuse check the fuse and relay if so get a bigger fuse to run the new headlights. Remember when replacing any light in your vehicle to not touch the glass part of the bulb with your bare fingers..

Jun 21, 2013 | 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

How to change headlight bulb


On the back of the headlight where the wires enter, you should be able to twist and remove the lamp holder. Be careful with the new bulb if it is halogen, do not touch the bulb!!

Apr 13, 2013 | 2000 Hyundai Sonata

3 Answers

Replace headlight bulb


  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
  27. PLS VOTE ME
BMW e46 HID Headlight Replace
replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-0.jpg

replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 23, 2012 | 2000 GMC Denali

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

1 Answer

How to remove,replace,front right headlight, 200' rav-4 ?


Headlight bulbs are easily replaced. At the back of the headlight assembly, under the hood, find the electrical connector and turn it counterclockwise a quarter turn, then pull out the connector and attached bulb. Remove the old bulb, and replace with your new bulb. Do not touch the glass part of bulb with your hands or fingertips- it will shorten bulb life. Put the new bulb back into place and turn it clockwise to secure it..

Nov 14, 2012 | 2000 Toyota RAV4

1 Answer

How to change headlight on 2000 galant


  • 1
    Place the Mitsubishi on a flat service in park. Set the parking brake before continuing.

  • 2Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.


    3

    Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.


    4

    Grab the bulb and pull it from the socket with a slight wiggling motion.


    5

    Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.


    6

    Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.


    7

    Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.


    8

    Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed.


    9Close the Galant's hood.


    Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe

    Sep 27, 2012 | 2000 Mitsubishi Galant

    2 Answers

    Lt. headlight low beam wont work after replacing the bulb.


    I assume it didn't work before you changed the bulb either. You'll have to check for voltage at the bulb socket when the low beam headlights are turned on. If there is none you'll have to trace the wire back to where it splits from the right low beam headlight. If there is voltage there you have a problem with the new bulb.

    Apr 10, 2011 | 1991 Lexus LS 400

    1 Answer

    How do I change the Driver's side Front Headlight on the 1998 Plymouth Grand Voyager?


    1. Unscrew the three screws that secure the headlight assembly to your Dodge Caravan. Put the screws in your pocket or another safe place, so you won't lose them before reinstalling the headlight assembly.
    2. Pull the headlight assembly away from the front of the vehicle. Turn the bulb retaining ring counterclockwise to unlock the electrical connector. Remove the electrical connector from the bulb assembly by pulling it straight out.
    3. Replace the old bulb with a new halogen headlight bulb. Connect the electrical connector and turn the bulb retaining ring clockwise to lock the bulb into place.
    4. Reinstall the headlight assembly and secure the screws tightly before closing the hood. Turn on your Dodge Caravan, flip on the headlights and verify they're working properly.

    Oct 16, 2009 | 1998 Plymouth Grand Voyager

    2 Answers

    Headlight repair on 2003 Mercedes Benz E320


    how do you change left low beam bulb on 2003 mercedes e320

    Mar 15, 2009 | 2003 Mercedes-Benz E-Class

    Not finding what you are looking for?
    2001 Chevrolet Blazer Logo

    Related Topics:

    115 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    61249 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...