Question about 1991 Ford F150

2 Answers

My friend has a 1991 ford ranger ....when he drives it ,,it does want to shift into overdrive ...i told him that he might need to change his tranny fluid and filter...his fluid is brownish ...but the garage says that theres no metal residue in the pan ...theyre telling him that he needs a transmission processor ....i never heard of it ,,,what do you think??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 91 ford F350 with a the international diesel in it.
I replaced my tranny filter in my truck and put fluid in it and started it up and it started making this trouble grinding noise and I cant really tell where is coming from this is the first time that I have changed the tranny filter and before I changed it, it wasnt making the noise!!! so plz help me

Posted on Feb 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 38 Answers

Has he changed the fluid? this might be all thats needed also can get some good additives these days to help sticking valves in transmission and not too expensive either (approx £30... $50 ?) which for the sake of this small outlay is worth the risk.

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the overdrive solioned for a 3.0L 1991Ford ranger located inside valve body of transmission


91 Ranger - No OverDrive - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Small Chassis Trucks > Ranger & B-Series
Nov 18, 2006 - 91 Ranger - No OverDrive Ranger & B-Series. ... 1991 RangerAutomatic 3.0L 186,000 miles. Today the overdrive didn't work on my truck. ...However, if it is not a solenoid on vacation, you have probable failure coming down ... 2000 Explorer 5r55e transmission issues, drive and reverse.
Feb 5, 2013
A4LD - 4R44E and 4R55E
Oct 19, 2011
Transmission Bang Shifting - Overdrive Off Light Flashes
Jul 21, 2008
91 explorer trans porblem/ no overdrive
Nov 17, 2007
More results from www.ford-trucks.com

Aug 26, 2015 | Cars & Trucks

1 Answer

1996 ford ranger, automatic trans, Torque converter will not unlock at times (50%) trans has very harsh upshifts as well. 3.0 L engine with f speed overdrive


im not sure about the fan Try spraying the heck out of the entire assembly on the drivers side of the tranny with PB Blaster and as for hard shifts is it manual or auto? if auto change filter

May 01, 2010 | 1996 Ford Ranger SuperCab

2 Answers

Ford Ranger 98'Splash don't shift 3rd and


you will need to connect it ti a scanner to confirm but it sounds like your solenoid (there is a solenoid that controls those gears inside your tranny) the part is actually cheap and should take no time to replace. the cost comes in a way of replacing the tranny fluid that will be lost.

Apr 07, 2010 | 1998 Ford Ranger SuperCab

3 Answers

Overdrive light flashes on and off


This will occur if the control solenoids that are located inside the pan on the valve body, are malfunctioning. First, i would check the fluid level. if the fluid level is proper, have the tranny flushed and change the filter as well. If this doesn't fix the issue, go ahead and replace the control solenoids.

Aug 24, 2009 | 1999 Ford Ranger SuperCab

1 Answer

Transmisson overdrive


does your truck have an od on/off switch?if so its bad.if not you have an overdrive solenoid on trans that is going bad.GinoR

Mar 22, 2009 | 1991 Ford Ranger Supercab

1 Answer

1998 ford econoline transmission problem


This will sound odd, but if the fuel filter hasn't been changed in a long time replace it and check that air filter isn't clogged up. If this isn't causing it you can try changing the fluid if it's been neglected and add TransX.

Oct 30, 2008 | 1991 Ford Econoline

1 Answer

1992 A4LD trans problems.


Sounds like the shift kit is warn out in the transmission. The overdrive line may not be able to provide enough hydrolic pressure to engage the gears to move the truck. When you switch to regualr drive, that line is able to build the hydrolic pressure to engage the gears. At a certian speed (for the transmission, certian hydrolic pressure) there is enough pressure to engage the gears in overdrive, but go below that, and you have to start in drive again. If this is the case, there is no easy fix for that and I recomend taking it to a transmission shop to have your shift kit examined. Opening up an automatic transmission requires specalized tools, clean shop enviroment, and knowlage more then the average back yard machanic has.

Sep 13, 2008 | 1992 Ford Ranger

2 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
1991 Ford F150 Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...